Installation Guide

39
0
Front of
cabinet
C
~ 10 (254mm)
~ 40 (1016mm)
~ 69 (1753mm)
2 (50mm)
2

(50mm)
D
B
1
Break off the datum lip to each side trim bracket and discard.
Repeat for all side trim brackets.
Discard
A
Plastic
Aluminum
Internal box
D
Cabinet side
trim install kit
Side trim bracket
(6)
#8 x 16 Mush Washer Twin Thread Philips Screw
#8 x 16
Mush Washer
Twin Thread
Philips Screw
#8x16 mush washer
screw (12)
External box
Cabinet side trim
(2)
Tools
Hacksaw
Cross-head screwdriver
Pencil
For 80 (2032mm) cavity
installationonly
2
Measure 4 (102mm) from the top
ofthe side trim with a square ruler
and mark a cutting line (A).
3
Cut along the line using a fine
tooth hacksaw to a length of 76
(1930mm)(B).
IMPORTANT!

Ensure the cut is straight and square
as this is an exposed surface.

Ensure the plastic part does not
bend as this can causevisual
stressmarks.
Repeat for the remaining sidetrim.
4
Position three side trim brackets on one side trim. Referto(B)
forbracket locations.
5
Open the French doors. Measure 2 (50mm) from the front
of cabinet (from behind the doors), to the front of the alcove
andaccurately mark a vertical line (C).
6
Align the bracket edge with the marked line and fix the bracket
tothe cabinetry with #8x16 mush washer screws (D).
Repeat on the opposite side.
IMPORTANT!
Ensure correct positioning of bracket to preven inaccurate fitting
of side trim or gaps existing between side trim and appliance.
@6CABINET TRIMS INSTALLATION—[B] FIXED SCREW METHOD