User Guide
Table Of Contents
- Contents
- Introduction
- Safety and warnings
- Before you begin
- Control panel
- ActiveSmart™ special features
- Wine care
- Using your appliance
- Loading your wine bottles
- Replacing carbon filter
- Wifi connection
- Cleaning care - exterior
- Cleaning care - interior
- User warnings and sounds
- Troubleshooting
- European directive 2012/19/EU on Waste
- Electrical and Electronic Equipment (WEEE)
- Service & warranty
16
The Integrated Wine Cabinet has a recommended maximum storage capacity of 91
standard 750ml bottles. The loading arrangement outlined is recommended when using
the wine cabinet at full capacity. Racks may be removed to store larger sized bottles.
DOs
●
Before loading wine into the cabinet confirm
that all racks are secured and stable.
●
Stack wine bottles of same sizes to enable
easy access if required.
●
Only interlock wine bottles of the same size.
This ensures the first tier is stable to allow
stacking.
●
Follow the recommended loading arrangement
outlined for each rack.
DON’Ts
●
Do not load more than the recommended
number of wine bottles on each rack.
●
Do not interlock wine bottles of different sizes
that do not fit well together on a rack.
LOADING YOUR WINE BOTTLES
IMPORTANT!
●
When stacking bottles, take extra care to
avoid breakages.
●
A net or vented mat can be used between
bottles in a stack to minimise risk of
breakage. Alternatively, net sleeves can be
used to protect individual bottles.
●
Ensure the protector sleeve or mat you use
allows sufficient air flow and is odour free.