Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Warming drawer models
- Unpack your product
- Parts supplied
- Tools required
- Product dimensions - 24" minimal & contemporary models
- Product dimensions - 30" minimal & contemporary models
- Product dimensions - 30" professional models
- Cabinetry dimensions - 24" minimal & contemporary models
- Cabinetry dimensions - 30" minimal & contemporary models
- Cabinetry dimensions - 30” professional models
- Installation options
- Installing the drawer
- Adjusting the depth
- Adjusting the height
- Installer checklist
6
Remove the warming drawer and accessories box from the packaging. Recycle the materials
that can be reused. Dispose packaging materials in accordance with local regulations on waste
disposal.
Inspect the warming drawer for any signs of damage. Do not install the warming drawer if it
has been damaged. If the product is damaged, contact your local Fisher & Paykel dealer.
UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS
RECYCLE
RESPONSIBLY
All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and
supported service technician.
WB24 WB30
Supply 110 VAC, 60 Hz 110 VAC, 60 Hz
Service 10 amp circuit 10 amp circuit
Maximum Power 810 W 810 W
Power outlet* 3-prong grounding-type 3-prong grounding-type
Power cord (total length) 70 7/8" (1800mm) 70 7/8" (1800mm)
* The power outlet must be earthed and located within 35 7/16” (900mm) of the centre rear of the product.