Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Warming drawer models
- Unpack your product
- Parts supplied
- Tools required
- Product dimensions - 24" minimal & contemporary models
- Product dimensions - 30" minimal & contemporary models
- Product dimensions - 30" professional models
- Cabinetry dimensions - 24" minimal & contemporary models
- Cabinetry dimensions - 30" minimal & contemporary models
- Cabinetry dimensions - 30” professional models
- Installation options
- Installing the drawer
- Adjusting the depth
- Adjusting the height
- Installer checklist
17
ADJUSTING THE DEPTH ADJUSTING THE HEIGHT
Open the drawer fully.
Using a hex key, turn the adjustment
screw to move the front panel forward.
Turn clockwise to move backwards or
counterclockwise to move forwards.
1
2
The depth is adjustable within
3/16" (4mm).
The depth of the front panel of the warming drawer can be adjusted to align with the
surrounding cabinetry.
Open the drawer fully, and slightly
loosen the screws.
1
2
3
Adjust to the required height and then
re-tighten the screws. The height is
adjustable within 1/16" (2mm).
Close the drawer and check the
alignment. Adjust again if necessary.
The front panel of the warming drawer can be adjusted vertically to align with the surrounding
cabinetry.
max 1/16" (2mm)