User Manual
4
Assembly
1
2
3
• Turn the arch over so the battery door is facing up. Position a wall so the foot is facing up.
• Fit three of the pegs on a wall into the loop and notches in the arch.
Hint: The wall is designed to fit one way. If it does not seem to fit, try the other wall.
• Fit a narrow brace to the posts on the wall.
Hint: Each narrow brace is designed to fit one way. If it does not seem to fit, try the other
narrow brace.
• Insert three screws into the holes in the narrow brace and tighten.
Arch Battery Door
Arch Notches
Arch Loop
Foot
Arch Wall
Narrow Brace