Weather Radio User Manual

Rosemount Models 244EH and 244ER PC-Programmable Temperature Transmitters
2-4
Special Mounting
Considerations
Special mounting hardware is available for mounting a
Model 244EH head mount transmitter to a DIN rail, or assembling
a new Model 244EH to an existing threaded sensor connection head
(former option code L1).
Mounting a Model 244EH to a DIN Rail
To attach a head mount transmitter to a DIN rail, assemble the
appropriate rail mounting kit (part number 00644-5301-0010) to the
transmitter as shown in Figure 2-3, then follow the procedure under
“Rail Mount Transmitter with Integral Mount Sensor” on page 2-7.
Figure 2-3. Assembling Rail Clip
Hardware to a Model 244EH
Retrofitting a Model 244EH for Use in an Existing Threaded Sensor
Connection Head
To mount a Model 244EH in an existing threaded sensor connection
head (former option code L1), order the Model 244EH retrofit kit (part
number 00644-5321-0010). The retrofit kit includes a new mounting
bracket and all associated hardware necessary to facilitate the
installation of the Model 244EH in the existing head.
Figure 2-4. Assembling Model
244EHforUseinanExistingL1
Connection Head
G-Rail (asymmetric) Top Hat Rail (symmetric)
Note: Kit includes Mounting Hardware and both types of rail kits.
Transmitter
Mounting
Hardware
Rail Clip
Transmitter
Mounting
Hardware
Rail Clip
644-5302B01A, D02A
644-5321A01A
Kit includes replacement
bracket and screws.
Existing Threaded Sensor
Connection Head
(Former option code L1)