Weather Radio User Manual

Rosemount Models 244EH and 244ER PC-Programmable Temperature Transmitters
3-4
NOTE
Each configuration parameter is explained in detail in the on-line help
provided with the software. To access help, click the HELP button on
the main configuration window (see Figure 3-1).
5. Click the SEND TO XMTR button to upload configuration
information to the transmitter. The software will indicate whether
the configuration is successful or unsuccessful. If the configuration
succeeds, then go to step Step 6. If the configuration does not
succeed, then refer to Section 4: Maintenance and Troubleshooting
for a list of possible causes and repeat Step 5 until the transmitter
configuration is successful.
6. Click the SAVE TO FILE button to save the configuration
information for use with other transmitters.
NOTE
To ease the process of later finding a specific configuration file, name
saved files according to a logical system and preserve the default .244
filename extension.
7. Click the CANCEL button to close the main
configuration window.
Configuring Several
Transmitters Identically
To configure several Model 244E transmitters identically, perform the
following procedure:
1. Configure a single transmitter according to “Configuring a Single
Transmitter” on page 3-3 and save the configuration to a file.
2. Select OPEN from the FILE menu to open the saved
configuration file.
3. Connect a new transmitter to the Configuration Interface.
4. Click the SEND TO XMTR button to upload the configuration
information to the transmitter. The software will report whether
the configuration is successful or unsuccessful. If the configuration
succeeds, then go to Step 5. If the configuration does not succeed,
then refer to Section 4: Maintenance and Troubleshooting for a list
of possible causes and repeat Step 4 until the transmitter
configuration is successful.
5. Repeat Steps 3 and 4 until all transmitters are configured.
6. Click the CANCEL button to close the main configuration screen.