Manual

ManualsBrandsFisher ManualsMetal Detectorscw 20

1

2

3

4

5

6

7

OPERATING MANUAL

CW20

®

Hand Held

Metal Detector

2-YEAR LIMITED WARRANTY

This product is warranted against defects in materials and workmanship under normal

use for two years from the date of purchase to the original owner.

Damage due to neglect, accidental damage or misuse of this product is not covered

under this warranty. Decisions regarding abuse or misuse of the detector are made

solely at the discretion of the manufacturer.

Proof of Purchase is required make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option, the

metal detector returned, shipping cost prepaid to Fisher Labs. Shipping cost to Fisher

Labs is the responsibility of the purchaser.

To return your detector for service, please first contact Fisher Labs for a Return

Authorization (RA) Number. Reference the RA number on your package and return

the detector within 15 days of calling to:

Fisher Research Labs, Inc.

1465-H Henry Brennan Dr.

El Paso, TX 79936

Phone: 915-225-0333 ext.118

Warranty coverage does not include the cost of transporting the detector back to an

owner who is located outside of the United States of America.

Fisher Research Labs does not warrant suitability for a specific purpose, and shall in no

event be liable for any direct, incidental, or consequential damages.

OPERATING MANUAL

CW20

®

Hand Held

Metal Detector

2-YEAR LIMITED WARRANTY

This product is warranted against defects in materials and workmanship under normal

use for two years from the date of purchase to the original owner.

Damage due to neglect, accidental damage or misuse of this product is not covered

under this warranty. Decisions regarding abuse or misuse of the detector are made

solely at the discretion of the manufacturer.

Proof of Purchase is required make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option, the

metal detector returned, shipping cost prepaid to Fisher Labs. Shipping cost to Fisher

Labs is the responsibility of the purchaser.

To return your detector for service, please first contact Fisher Labs for a Return

Authorization (RA) Number. Reference the RA number on your package and return

the detector within 15 days of calling to:

Fisher Research Labs, Inc.

1465-H Henry Brennan Dr.

El Paso, TX 79936

Phone: 915-225-0333 ext.118

Warranty coverage does not include the cost of transporting the detector back to an

owner who is located outside of the United States of America.

Fisher Research Labs does not warrant suitability for a specific purpose, and shall in no

event be liable for any direct, incidental, or consequential damages.

Summary of content (8 pages)

PAGE 1
2-YEAR LIMITED WARRANTY This product is warranted against defects in materials and workmanship under normal use for two years from the date of purchase to the original owner. Damage due to neglect, accidental damage or misuse of this product is not covered under this warranty. Decisions regarding abuse or misuse of the detector are made solely at the discretion of the manufacturer. Proof of Purchase is required make a claim under this warranty.
PAGE 2
COMFORT GRIP OPERATOR DETECTION ALERTS INTERFERENCE ELIMINATION FEATURES • Audio Alert – High Pitch Sound • Vibration Alert • LED Target Indicator - Red • 3 Operating frequency selections to eliminate electromagnetic interference from other devices Body Scanning for the Detection of Metal Objects Always test the detector before operation. Sweep the detector across a known metal object, and verify detection with audio, vibratory, and visual feedback.
PAGE 3
Power Switch with Momentary Low The Power switch has 2 "ON" positions and a forward "OFF" position. The detector is OFF with the switch in the "UP" position The detector is ON with the switch in the "MIDDLE" position Momentary Low OFF The detector is in MOMENTARY LOW operation with the switch ON held in the "DOWN" position. While holding down the "Momentary Low" switch, the detection range will be reduced.
PAGE 4
First Time Operation To Operate the Detector, 1) Install the Batteries a. Use a 9-volt ALKALINE battery only (battery not included) b. Install battery with correct polarity (align "+" on detector housing with "+" on battery) c. The battery cover opens and closes with a coin or screwdriver 2) Set the On switch to "ON" "ON" is the middle position 3) Select Audio or Vibrate Mode 4) Sweep the Detector over the target area.
PAGE 5
First Time Operation To Operate the Detector, 1) Install the Batteries a. Use a 9-volt ALKALINE battery only (battery not included) b. Install battery with correct polarity (align "+" on detector housing with "+" on battery) c. The battery cover opens and closes with a coin or screwdriver 2) Set the On switch to "ON" "ON" is the middle position 3) Select Audio or Vibrate Mode 4) Sweep the Detector over the target area.
PAGE 6
Power Switch with Momentary Low The Power switch has 2 "ON" positions and a forward "OFF" position. The detector is OFF with the switch in the "UP" position The detector is ON with the switch in the "MIDDLE" position Momentary Low OFF The detector is in MOMENTARY LOW operation with the switch ON held in the "DOWN" position. While holding down the "Momentary Low" switch, the detection range will be reduced.
PAGE 7
Body Scanning for the Detection of Metal Objects Always test the detector before operation. Sweep the detector across a known metal object, and verify detection with audio, vibratory, and visual feedback. Motion is Required: The metal detector must be IN MOTION, sweeping across the target area, to detect the presence of metal. The subject should stand upright, with arms and legs extended. DETECTOR FEATURES 1. Quick-Change Battery Compartment Use a coin or screwdriver to open compartment.
PAGE 8
2-YEAR LIMITED WARRANTY This product is warranted against defects in materials and workmanship under normal use for two years from the date of purchase to the original owner. Damage due to neglect, accidental damage or misuse of this product is not covered under this warranty. Decisions regarding abuse or misuse of the detector are made solely at the discretion of the manufacturer. Proof of Purchase is required make a claim under this warranty.