Manual

ManualsBrandsFisher ManualsMetal Detectorscw 20

Batteries

Use 9-Volt ALKALINE battery only (battery not included)

Low Battery Alert

The Yellow LED indicator light will illuminate and remain illuminated before the batteries

are discharged to the point at which the detector has lost any of its metal detecting

range.

In order to guarantee maximum detection at all times, replace battery as soon as yellow

light illuminates.

The detector will continue to operate, at a lower sensitivity, after the Low Battery

Indicator is illuminated. Replace batteries as soon as possible after the indicator

illuminates.

If you plan to store the CW20™

for several days or more,

remove the battery.

YELLOW LED

Low Battery

Indicator

Battery

Chamber

First Time Operation

To Operate the Detector,

1) Install the Batteries

a. Use a 9-volt ALKALINE battery only (battery not included)

b. Install battery with correct polarity

(align "+" on detector housing with "+" on battery)

c. The battery cover opens and closes with a coin or screwdriver

2) Set the On switch to "ON"

"ON" is the middle position

3) Select Audio or Vibrate Mode

4) Sweep the Detector over the target area.

Detector must be IN MOTION to detect metal

5) Read this manual for proper training in the detection of metal objects