Manual

Comprehensive Operating Manual & Guide to Metal Detecting

Mechanicals (continued)

Adjust the arm rest in or out accordingly

Adjust the arm rest forward or back, to

adapt to your arm’s length.

F75

ARM REST

The arm rest WIDTH and POSITION are both

adjustable.

Arm Rest Width: The sides of the arm rest

can be bent inward and outward.

To best stabilize the detector to your arm

and body movement, squeeze the sides

of the arm rest around your forearm. For

a very secure fit, some users prefer to

bend the arm rest in tightly against the

forearm such that you pry the sides loose

each time you place your arm into the

arm rest.

Arm Rest Position on Pole: Remove the two

bolts to position the arm rest farther forward

or back, to adapt to your arm’s length.

-- To reinsert the bolts, spin and twist

them into place. Be careful not to

damage the power cable that runs

through the aluminum tube.

-- Insert both bolts completely through

both sides of the bracket

before attaching the nut to the opposite

side.

-- After reinserting the bolts, tighten them

very securely. You may need to use gloves for a firm grip. As you swing the detector

from side-to-side, you want the bolts tight enough so that you do not feel any

movement between the pole and arm rest mounting bracket.

If you notice unwanted movement while swinging detector, check the tightness of the

locking collars.

The locking collars must be rotated a full 270° to reach the locking position.

HEADPHONES (not included)

The F75 is equipped with a standard 1/4-inch stereo headphone jack at the rear of the unit,

located under the elbow as you hold the detector for use. Any headphone with a stereo plug

should work; headphones with a mono plug will not work. This device is to be used with

interconnecting cables/headphones shorter than three meters.

Using headphones (not supplied) improves battery life, and prevents the sounds from

annoying bystanders. It also allows you to hear subtle changes in the sound more clearly,

particularly if searching in a noisy location. For safety reasons, do not use headphones near

traffic or where other dangers, like rattlesnakes, are present.

This device is to be used with interconnecting cables/headphone cables shorter than three meters.