Color TV Owner's Manual PC-20S00M

6
QuickTips
■
Point the remote
control toward the
TV. Objects between
the remote control
and the TV may
cause misoperation
of the remote control
function.
■
Make sure the
batteries have been
installed correctly.
■
Cannot select
channel with number
keys. Press “0” in
front of numbers
1 ~ 9. Example:
Channel “05.”
■
The “C” in front of
the channel number
indicates a Cable
channel.
■
Channel number
cannot be displayed
continuously when
captioning is on.
■ Adjusting the
volume level: Right
flashing arrow indi-
cates volume is
increasing and left
flashing arrow
indicates volume is
decreasing.
■
This remote control
has glow-in-the-dark
Power, Channel, and
Volume keys.
■
Using V-Guide
TV Parental Guide-
lines settings can
be changed only
by using the
Remote Control.
See pages 12 and 13.
➀
Video Mode Key
Press to select the program source to
be displayed on the screen: TV signal
or signal from the equipment you have
connected to the A/V jacks.
➁
Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to
select channel 6. For cable channels
100 through 125, press and hold the
1 key until
CC
CC
11
11
––
––
––
–– appears. Then press
the other two numbers.
➂
Caption Key (See page 11.)
➃
Menu Key
Use this key with the navigation keys
/ and / to adjust features
of the on-screen menu system
(see pages 7~9).
➄
Channel Scanning (CH / )
and Volume (VOL / ) Keys
Press to scan through the channels in
memory and to adjust the volume.
➅
Mute Key
Press once to lower the volume. Press
again to restore.
Note: When using the audio out jacks,
this key will not mute the sound.
➆
V-Guide Key (See pages 12 and 13.)
➇
Reset Key
Press this key twice to restore factory
settings. The TV will automatically
start Channel Search and clear all
customized settings (see page 14).
➈
Power Key
Press to turn TV on or off.
➉
Sleep Key
Use this key with the “0” key to set the
Sleep Timer (see page 14).
Recall Key
Select a channel then select another
using the number keys. Press Recall
to switch between the channels.
Display Key
Press once to display the Channel
number. Press twice to display the
channel number continuously. Press
again to remove the display.
REMOTE CONTROL KEYS
Point towards TV
11
12
MENU
VOL
RECALL
CAPTION SLEEP
RESET
POWER
MUTE
DISPLAY
VOL
CH
1
4
7
0
8
5
23
6
9
VIDEO
MODE
V-GUIDE
➀
➁
➂
➃
➄
➈
➉
➆
➇
➅
11
12
➠