Fitbit User's Manual
The Fitbit Tracker is a wearable fitness monitor that tracks your steps, distance and calories. 1. Package Contents Your Fitbit comes with the Fitbit device. Model number: F003 Wireless base station and charger. Model number: F004 Holster Sleep wristband. Put the Fitbit into the sleep wristband when you are sleeping. 2. Charging your Fitbit a. Plug the Fitbit Base Station into your computer's USB port. b. Place the Fitbit onto the Base Station. A battery symbol will appear on the Fitbit.
. Using your Fitbit There is one main button on your Fitbit. If you press the button, it will rotate through 4 screens.
General Wellness This is the proper way to wear the Fitbit while sleeping. If you experience problems with the Fitbit, you can reset the Fitbit, by placing the Fitbit on the Base Station and then pressing the reset button that is located underneath the Base Station. Use a sharp implement to press the reset button. The Fitbit device and the Base Station are also wireless tranceivers, which transmit data back and forth. Future software will allow users to record and save this data on their computer.
4. Software Sample software is provided which can transfer your data. To use the software for Windows Unzip the contents of FitbitUSBXpressDriverInstall.zip and run the program FitbitUSBInstaller.exe Plug in your Fitbit Base Station. If you have already plugged in the Base Station, please unplug and re‐plug the Base Station Unzip the contents of FitbitDebugger.zip and run the program fitbit‐debugger‐1.5.17.exe. You should see the following screen show up. For host, enter www.fitbit.
The program will connect to the Tracker whenever it is within range and start transferring data to the logs directory. For best results, please place the Tracker in line of sight within 3 meters of the Base Station. 5.
6. Federal Communications Commission (FCC) Statement Fitbit Tracker FCC ID: XRAF003 Fitbit Base Station FCC ID: XRAF004 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
7. Industry Canada (IC) Statement Fitbit Tracker IC: 8542A‐F003 Fitbit Base Station IC: 8542A‐F004 This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference, including interference that may cause undesired operation of the device.
