WZ HK 8 Heißklebepistole Artikelnummer: 77022 WZ HK 8 glue gun Item No. 77022 WZ HK 11 Heißklebepistole Artikelnummer: 77023 WZ HK 11 glue gun Item No. 77023 WZ HK 11-WL Heißklebepistole kabellos Artikelnummer: 77026 WZ HK 11-WL glue gun wireless Item No.
Bedienungsanleitung Fixpoint® - Heißklebepistolen WZ HK ACHTUNG! Lesen Sie die Bedienungsanleitung vollständig und sorgfältig durch. Sie ist Bestandteil des Produktes und enthält wichtige Hinweise zur korrekten Montage und Benutzung. Bewahren Sie sie auf, damit Sie diese bei Unsicherheiten und Weitergabe des Produktes parat haben.
Lieferumfang: 1 x Fixpoint ® - WZ HK Heißklebepistole 2 x 8mm oder 11mm Klebesticks (modellabhängig) 1 x Bedienungsanleitung 4 Aufbau: 1) 2) 3) 4) 5) 6) Heißklebepistole Öffnung für Klebesticks Netzkabel Heizstation (nur WZ HK 11-WL) Zughebel Gestell und Klebedüse 5 Sicherheitshinweise: ACHTUNG! Die Demontage der Heißklebepistole darf nur durch ausgebildetes Elektro-Fachpersonal erfolgen! Es besteht Stromschlag- und Verbrennungs- gefahr! • • • • • • • • • Ihr Fixpoint ® -Produkt ist ke
Bedienungsanleitung • • • • • • • • treffen Sie geeignete Transportmaßnahmen, z.B. in der Originalverpackung. Öffnen Sie niemals das Gehäuse, da das Gerät mit 230V ~AC betrieben wird! Verwenden Sie keine beschädigten Teile. Bitte beachten Sie die Nutzungsbedingungen in Kapitel 2. Da der Klebstoff bis zu 140°C heiß wird, besteht Verbrennungsgefahr! Tragen Sie geeignete Schutzhandschuhe, um Verletzungen zu vermeiden.
8 Pflege, Wartung, Lagerung und Transport: • • Ziehen Sie immer den Netzstecker und lassen Sie das Gerät abkühlen! Bitte reinigen Sie das Produkt nur mit einem trockenen Leinentuch. Gehen Sie beim Reinigen vorsichtig vor, um Kratzer zu vermeiden. Bei starken Verschmutzungen kann das Reinigungstuch leicht mit Wasser angefeuchtet werden. Setzen Sie keine Reinigungsmittel und Chemikalien ein, da dies den Kunststoff angreifen kann. • Entfernen Sie Kleberückstände vorsichtig mit einem kleinen Messer.
Bedienungsanleitung • Der Hersteller behält sich Druckfehler und weiterhin das Recht vor, Änderungen an Geräten, Verpackungen und sämtlichen Begleitpapieren wie Bedienungsanleitungen ohne vorherige Ankündigung zu vollziehen. 11 Technische Daten: Modell 77022 77023 Betriebsspannung Heizleistung 77026 220-240V~ 50Hz 10(60)W 25(80)W Aufheizdauer 15(80)W ca. 10min. Verarbeitung des Klebers T = 100 - 170°C T = 100 - 200°C offene Zeit des Klebers ca.
Manual Fixpoint® - WZ HK glue guns ATTENTION! Read the manual completely and carefully. It is part of the product and contains important advices for correct implementing and use. Retain this manual for availability when passing to other persons and if there are further questions.
4 Construction: 1) 2) 3) 4) 5) 6) glue gun opening for glue sticks mains cable heating station (only WZ HK 11-WL) drain stand and blast pipe 5 Notes on Safety: ATTENTION! Demounting of the housing is only permitted to skilled electricians! There is a danger of electric-shock and burns! • • • • • • • • • • • • • • • • • Your Fixpoint ® product is no toy and children must not use it anyway, because it contains fragile, small and swallowable parts such as cables, which can strangle and shock people by elect
Manual 6 Startup: 1. Place the glue gun on solid, fire resistant and not heat conducting sufaces, model WZ HK 11-WL on the heating station. 2. If requested, connect the mains cable to the glue gun, then to a mains socket. ATTENTION! The glue guns heat up promptly! Connect the mains cable of model WZ HK 11-WL also with its heating station and then with a mains socket for wireless operation.
9 Troubleshooting: Problem Help The glue gun does not heat up. Check the connection to an operating mains socket. Check if the device is correctly plugged in the heating station (only WZ HK 11-WL). The glue sticks move very hardly. Make sure of using the right glue stick diameter of 7.2mm or 11mm by reading chapter 11. Adjust the blast pipe by turning. other questions and problems Disconnect the device from mains immediately! Do not touch the device and consult your dealer! Mind chapter 5 and 10.
Manual 11 Specifications: Model 77022 77023 operating voltage heating power 77026 220-240V~ 50Hz 10(60)W 25(80)W heating-up time 15(80)W ca. 10min. handling the glue T = 100 - 170°C offene Zeit des Klebers T = 100 - 200°C ca. 45s battery operating time - - 10 - 15 min. battery charging time - - 5 - 7 min. max. gluing capacity 4.5g/min. 7.0g/min. glue stick diameter Ø 7.2mm Stick 20.0g/min. Ø 11mm Stick cable length ca. 1.
Manual 14
Revision Date: 2012-11-19 Version 2 Fixpoint ® is a registered trademark of Wentronic GmbH in Germany and/or other countries. Wentronic GmbH Pillmannstraße 12 38112 Braunschweig, Germany Designed and Developed in Germany.