User's Manual

BlueTone

BTHF102/202 User Manual

. 9

Figure 4 Back of the device Figure 5 fixing the mounting dock

Fixing BlueTone

BTHF202 (referring to Figure 6)：

1. Plug the part 1 to the inlet, then tear the paper off the Double-side Sticker, paste the mounting dock on the right

place on the vehicle. If using the clamp one, insert the clamp in the air conditioner air outlet in the car. Note

that, the microphone of the Handsfree can’t aim at the air conditioner air outlet to avoid noise in talking mode.

2. Put the device in the mounting dock. Note that, the charging port which is on the device and the gap which is

on the mounting dock must at the same direction.

b) c)

Figure 6 fixing the mounting dock

2.3 Turn On/Off Handsfree

Turn on the Handsfree: Long press K1, you will hear 2 power-up tones, and Blue LED gives 1 blink per 3

seconds; Red LED is off. This indicates the handsfree is power on.

Hole

Double-side Sticke

Stanchion

Inlet

Mounting dock

Part 1

Double-side Sticker

Charging port

Gap

Clamp

Air conditioner

air outlet