User's Manual

BTHF341 User Manual
. 17
5. Important Messages and Frequently Asked Questions
Q1. Red LED blinking:
Low battery indicator; please recharge your battery as soon as possible.
Q2. Can't power up the device after charging more than 20 minutes:
For first time use, the device should be charged at least 40 minute in advance. It is recommended that the
battery should be fully charged before using the device.
Q3. Without charging indicator:
When the battery runs off or the handsfree has not been used for a while, the Red LED may take a while to
light up after the charger gets connected.
Q4. Can't hear anything on handsfree-you should check the followings:
 Handsfree is power on
 Handsfree has paired with a handset
 Handsfree has connected with a handset (except the handset only supports Headset Profile）
 Handsfree and handset are within 10m
 Handsfree and handset have good signal strength
Q5. Can the handsfree get connected to different phones simultaneously?
No. The handsree can only get connected to one handset each time, though it could store pairing information
of up to 8 Bluetooth enabled devices.
Q6. Does the paired handsfree or the paired handset need to be repaired after power off:
No. Please note that for the handset supporting handsfree profile, the handsfree and the handset must be
connected first before making/receiving. Refer section 2.4.3 for details.
Q7. Voice dialing does not work:
First check whether or not the handset supports voice dialing function. Then make sure your handset has
recorded the voice tag. If already recorded, try recording again with your handsfree. Please note that noisy
environment may affect voice dialing.