Assembly And Installation Instructions

ManualsBrandsFleur De Lis Living ManualsCeiling LightsBruckner 4 - Light Lantern Drum Chandelier

Collar (H)

Canopy (I)

Outlet Box

House Grounding Wire

Wire Nut (E)

Nipple (C)

Mounting Strap (A)

Green Grounding Screw (F)

Hex Nut

Mounting Screw (D)

Upper Rod

Middle Rod

Lower Rod

Threaded Pipe

Fixture Wire

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Bulb Type A Max.100W

(Not Included)

Coupling Kit (G)

Fixture Grounding Wire

Hex Nut (B)

Set Screw

Parts:

Mounting

Screw (D)

Hex Nut (B)

Wire Nut (E)

Mounting Strap (A)

Nipple (C)

Green Grounding

Screw (F)

Coupling Kit (G)

Collar (H)

Canopy (I)

dust-proof

meshe

Fixture

socket base

Coupling

Fig. 1

Cover (P)

Finial (Q)

12”Rod (J)

6”Rod (K)

3”Rod (L)

Coupling

Side Glass (M)

Bottom Glass (N)

Cover (P)

Hex Nut (B)

Nipple-1 (O)

Finial (Q)

Bottom Glass (N)

Hex Nut (B)

Nipple-1 (O)

Fig. 2

socket base

Set Screw

Frame

Side Glass Panel (M)

Metal Panel

Frame

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Take two side glass panels and gently slide the side glass panels into the metal frame in place, secure them with two set screws. (See Fig.2) Repeat with other side glass panels. 2. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage. 3. Attach the two dust-proof meshes onto the socket base by aligning the holes, then secure them with four set screws. (See Fig.1) 4. Screw nipple-1 into the coupling of the socket base, then secure it with a hex nut. 5.