User Guide

427-0089-00-12 Version 180 August 2020 23
This document does not contain any export-controlled information.
Basic Operation and Configuration
Step 3 From the PC connected to the camera network, use the DNA utility to discover and display
the camera’s current IP address.
a Download the DNA utility.
b Unzip the utility, then double-click to run the executable file ( DNA.exe). All the units on
the VLAN are discovered.
c For additional instructions on using DNA, refer to the DNA User’s Manual available in the
Help ( ) link while the software is running.
Step 4 Right-click on the camera, select Assign
IP to change the IP address or select
between static IP or DHCP addressing.
Step 5 Double-click the camera in DNA’s
Discovery List to open the camera’s web
server Login page in a web browser, or
point a web browser to the camera’s IP
address.
Step 6 Enter admin for the user name and the
admin user’s password to open the Live
Video page. Refer to Live Video Page, pg.
25.
The default admin user’s password is admin. However, to prevent unauthorized access,
change it and all of the login passwords. For information on how to change the passwords,
refer to Basic Camera Configuration, pg. 28.
Online manual
Select a filter
Click to sort
Select IP Setup
Right-click