User Guide

427-0089-00-12 Version 180 August 2020 25
This document does not contain any export-controlled information.
Basic Operation and Configuration
2.3.2 Live Video Page
The Live Video page displays a live image from the camera on the left part of the screen and at the
top of the screen navigation options: Live Video (the red text indicates it is selected), Setup,
Maintenance, Help, and Log out.
In the lower right of the web page there is a frame rate selector. This selector allows the user to
change the rate at which the frames are displayed in the browser from the default 8 fps up to 16 fps.
This rate controls the user’s own web browser only, and does not affect the video streams to other
users or to an NVR. For slow communication links, if there is a problem displaying the video image,
it may help to slow down the frame rate.
Help
The Help menu displays software version information. If it is necessary to contact FLIR Technical
Support for assistance, it will be helpful to have the information from this page on hand. For
information about the camera including hardware part numbers and serial numbers refer to the
Product Info Menu, pg. 72.
Log out
Use this button to disconnect from the camera and stop the display of the video stream. If a web
session is inactive for 20 minutes, it will be stopped and it will be necessary to log in again.
Toggle PC/Camera time
Use this button to display either the PC time or the camera time.
Figure 2-2: Live Video Web Page—FC-Series ID
Snapshot
Toggle Time
Video Source