User Guide

427-0089-00-12 Version 180 August 2020 33
This document does not contain any export-controlled information.
Basic Operation and Configuration
Notification Lists Page: Use this page to setup multiple email addresses and other notifications
that can be sent as a result of alarms being processed by the Alarm Manager.
TLS Config Page: The settings on this page enable secure, encrypted communication between
clients and the camera; for example, when your web browser accesses the camera’s web interface.
Note
By default, TLS is disabled. Before enabling it, you need to generate or upload a valid certificate.
You can:
• Use the camera web interface to generate a self-signed certificate.
• Upload a self-signed certificate and a private key.
• Upload a certificate signed by a third-party, a public key, and a private key.
Certificates and keys must be in PEM format. Common file extensions for TLS files in PEM format
are:
For certificate and public key files: *.crt, *.cer, *.cert, *.pem
For private key files: *.key
From the TLS Config page, you can also download certificates and keys previously uploaded to or
generated by the camera. If the certificate saved on the camera is self-signed, you can download the
The camera also supports TLS authentication over the camera’s LAN. For information
about configuring TLS authentication for LAN communication, see IEEE 802.1X Security,
pg. 30.