User Guide

427-0089-00-12 Version 180 August 2020 57
This document does not contain any export-controlled information.
Advanced Configuration
If the Enable Network Broadcast Discovery
parameter is set to Yes, the camera sends
out a “discovery” packet on the network
every half second as an Ethernet broadcast.
To restrict client programs to allowed IP
addresses, enter allowed IP addresses in
the Remote Clients list, then set the Allow
anonymous clients parameter to No, and
click Save. The changes will not take effect
until the server is stopped and started.
After the interface is configured, scroll down and click on the Save button to save the configuration.
The changes will not take effect until the server is stopped and started.
It is also possible to restrict access to the camera from a web browser. Refer to Security Options
Page, pg. 37 to add an allowed IP address to the list in the Restrict Web Configuration section.
File Transfer
The camera can send a captured image when an alarm occurs (as well as storing the image locally
on the camera) if the camera network is configured with an associated FTP or a Network-attached
storage (NAS) server.
Enter the IP address, path, port, user name and password as required by the network. The
FC-Series supports both NAS NFS and NAS Samba. See Alarm Actions, pg. 66.
Set
Enter IP
Addresses
to No
pulldown
Enable
File Transfer
Select Custom
to enter a text
string prefix