User Guide

427-0089-00-12 Version 180 August 2020 59
This document does not contain any export-controlled information.
Advanced Configuration
Step 1 Select Maintenance > Sensor > Communications > VMS Remote.
Step 2 Click + ().
Step 3 From the drop-down list,
select IOI Interface.
Step 4 Click Create.
Step 5 Accept the message “Data for INTERFACE2 saved
correctly”.
Step 6 Using the Start button at the bottom of the page,
Stop and Start the server.
Click Accept at the prompt.
The status will show Server
Stopped.
Click on the Start button again
to restart the server.
Click Accept at the prompt.
The status will show Server
Running.
Link Cameras on trk-101-P Tracker
Link the PTZ camera and the FC-Series ID from the trk-101-P web interface.
Step 1 Ensure that the FC-Series ID Analytics have been calibrated (refer to Analytics
Calibration, pg. 51).
Step 2 With the FC-Series ID Analytics turned off, login to the trk-101-P and set presets for the
bound PTZ camera and link the preset scenes to the FC-Series ID scene.
This process is outlined here and detailed in the FLIR ioi HTML Edition Units User Guide
which can be downloaded from the product’s web page at https://www.flir.com/products/
trk-101/.
Click
Select
Click