User Guide
Table Of Contents
- Table of Contents
- Camera Installation
- 1.1 Warnings and Cautions
- 1.2 References
- 1.3 Installation Overview
- 1.4 Camera Connections
- 1.5 Concealed Cable Mount Accessory
- 1.6 Camera Specifications
- Basic Operation and Configuration
- Advanced Configuration
427-0089-00-12 Version 180 August 2020 63
This document does not contain any export-controlled information.
Advanced Configuration
Step 2 Scroll down to the TRK Metadata section.
Step 3 From the TRK Enabled drop-down list, select Yes.
Step 4 In the TRK IP Address text box, enter the IP address of the trk-101-P.
Step 5 From the TRK Video Input drop-down list, select Analog if the camera’s analog video
output is connected to the trk-101-P’s analog video input. Otherwise, select Digital.
Step 6 Click Save.
Configure the trk-101-P to deliver analytics metadata to the camera over IP
Step 1 On the trk-101-P’s web interface, select System > Unit Information.
Step 2 In the Operating Modes section, select Analog input, digital analytics output over IP if
the camera’s analog video output is connected to the trk-101-P’s analog video input.
Otherwise, select Digital input, digital analytics output over IP. This setting must match
the TRK Video Input setting on the camera.