User Guide

427-0089-00-12 Version 180 August 2020 70
This document does not contain any export-controlled information.
Advanced Configuration
Shown at the top of the screen is the configuration script file in a scrollable window. This can be
useful if help is ever needed from a support engineer.
Backup & Recovery
In the Backup & Recovery section, click the Restore link associated with the factory.defaults
configuration to restore the camera to its factory settings. This file can not be modified or deleted, so
it is always available.
Use the Backup button to make a backup of the final settings. This will make a backup copy of the
configuration file and store it locally on the camera.
Upload & Download
In the Upload & Download section, the Download button can be used to save a copy to a PC for
safe keeping. A pop-up window will ask for a file name and destination folder.
The Upload button is used to transfer a configuration file from a PC to the camera.
Note
Ethernet Loopback Reset
In the Ethernet Loopback Reset section, selecting No disables the capability to restore the camera’s
Factory Defaults (including its IP address and settings, user passwords, and configuration file) by
It is also possible to download a camera's configuration files using the following HTTP URL:
http://<ip>/configFilesGet.php, where <ip> is the camera's IP address.
You can manually test the URL or download the files by typing the URL in a web browser.
For security reasons, you cannot download the keys.ini file. The download consists of all other
configuration files.