User Guide
Table Of Contents
- Table of Contents
- Camera Installation
- 1.1 Warnings and Cautions
- 1.2 References
- 1.3 Installation Overview
- 1.4 Camera Connections
- 1.5 Concealed Cable Mount Accessory
- 1.6 Camera Specifications
- Basic Operation and Configuration
- Advanced Configuration
427-0089-00-12 Version 180 August 2020 73
This document does not contain any export-controlled information.
Advanced Configuration
Click on the Update button to save the settings. The changes will not take effect until the server is
stopped and started.
Config File Page: On the Config File page, you can enable Dynamic Visual Optimization (DV8),
perform supplemental flat field correction (sFFC), and change the sFFC offset mode. To perform
sFFC or change the offset mode, you need to stop the Nexus Server.
Caution!
Enabling DV8 can remove low-frequency shading in the video without performing a manual sFFC.
When DV8 is enabled, it updates the sFFC every 30 minutes. However, if you enable and then
Enable DV8 or perform sFFC only at the recommendation of FLIR Support. If not done properly,
enabling DV8 or performing sFFC can permanently damage the image.
Enter name
Click Update