Spec Sheet
FH-SERIES ID
For more information visit:
www.flir.com/FH-Series-ID
Imagery for illustration purposes only. Specications are subject to change
without notice. ©2022 Teledyne FLIR LLC, Inc. All rights reserved. 05-2022
www.teledyneflir.com
Thermal Sensor & Optics
Array Format (NTSC) 640 × 512
Detector Type Long-life, uncooled VOx microbolometer
Pixel Pitch 17 μm
Thermal Frame Rate NTSC: 30 Hz or PAL: 25 Hz / 8.3 Hz
Optical Characteristics Model FOV Focal Length F/#
669 69° × 56° 9 mm F1.4
644 44° × 36° 13 mm F1.0
625 25° × 18° 25 mm F1.1
617 17° × 14° 35 mm F1.1
612 12° × 10° 50 mm F1.2
610 10° × 8.2° 60 mm F1.2
608 8.6° × 6.6° 75 mm F1.1
Spectral Range 7.5 μm to 13.5 μm
Sensitivity (NEdT) <30 mK @ 25°C (77°F) F# 1.0
Visible Light Camera
Sensor Type 4K 2160p (3840 × 2160)
Optical Characteristics Model Default FOV Focal Length F/#
669 98° × 55° 3.6-10 mm 1.5 - 2.8
644 63° × 35° 3.6-10 mm 1.5 - 2.8
625 36° × 20° 9-22 mm 1.4 - 1.7
617 24° × 14° 13-55 mm 1.6 - 2.2
612 17° × 10° 13-55 mm 1.6 - 2.2
610 14° × 8° 13-55 mm 1.6 - 2.2
608 11° × 6° 13-55 mm 1.6 - 2.2
Video
Video Type IP and analog video
Sensitivity Color: 0.25 Lux (@ (f1.6 AGC On, 30 fps)
B/W: 0.10 Lux (@ (f1.6 AGC On, 30 fps)
Visible Frame Rate 30 Hz
Video Compression Two independent channels of H.264/H.265 or M-JPEG (except
4K) for visible and thermal
Streaming Resolution Primary stream:
Thermal: VGA (640 × 512), QVGA (320 × 256)
Visible: 4K (3840 × 2160), 1080p (1920 × 1080), 720p (1280 ×
720) & VGA (640 × 480)
Secondary stream:
Thermal: VGA (640 × 512), QVGA (320 × 256)
Visible: 1080p (1920 × 1080), 720p (1280 × 720) & VGA (640 ×
480)
Thermal Image
Settings
Auto AGC, Dynamic Detail Enhancement (DDE), Brightness,
Contrast
Thermal AGC
Region of Interest (ROI)
Default, Presets and User denable to ensure optimal image
quality on subjects of interest
Image Uniformity
Optimization
Automatic Flat Field Correction (FFC) - Thermal and Temporal
Triggers
System Integration
Ethernet 100/1000 Mbps
Network APIs NEXUS
®
SDK
NEXUS
®
CGI
ONVIF Prole S, G, T
Digital I/O Input: two dry alarm contacts
Output: two relay contacts 1 A max at 24 VAC/30 VDC
Congurable between normally open and normally closed
Network
Supported Protocols IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP,
ICMP, IGMP, DHCP, ARP, IEEE 802.1X
General
Input Voltage 12 VDC (±10%)
24 VDC (±10%)
24 VAC (±10%)
802.3 bt
Power Consumption Nominal: 15 W
Heaters enabled, 12 VDC: 48 W
Heaters enabled, all other inputs: 70 W
Environmental
IP Rating (Dust & Water
Ingress)
IP66, IP67
Operating Temperature
Range
-40°C to 70°C (-40°F to 158°F)
Storage Temperature Range -55°C to 85°C (-67°F to 185°F)
Corrosion MIL-STD 810G, 1000 hr salt spray
Humidity 0-95% relative
Shock IEC 60068-2-27
Vibe IEC 60068-2-64
Vandalism IK10 (except Windows)
Surge Immunity on AC Power
Lines
EN 50130- 4
Surge Immunity on Signal
Lines
EN 50130- 4
Surge/Lightning Protection TVS 6000 V Lightning protection, surge protection,
voltage transient protection
Compliance & Certications
FCC Part 15 (Subpart B, class A)
UL Listed
CE Marked
RoHS
IP66
WEEE
IEC 62368
ONVIF Prole S, G, T
Video Analytics
Region entrance/Intrusion detection
Tampering
Loitering
CNN classier
Cybersecurity
IEEE 802.1X
TLS/HTTPS
User authentication
Access control via rewall
User credentials with policy enforcement
Digest authentication
AMERICAS
27700 SW Parkway Ave.
Wilsonville, OR 97070
Ofce: +1 877.773.3547
6769 Hollister Ave.
Goleta, CA 93117
Ofce: +1 805.690.6600