Quick Installation Guide

427-0200-01-10 Rev 120
October 2021
This document does not contain any export-controlled information.
d. Click System Settings.
Make sure the Network page appears.
e. You can select Static and manually specify
the camera's Hostname, IP address,
Netmask, and Gateway. You can also
specify the DNS Mode, Name Servers,
MTU (maximum transmission unit), and
Ethernet Speed.
f. Click Save. If you have made any changes on the Network page, the camera
reboots.
Note
For more information about configuring the camera for networking,
see the camera’s installation and user guide.