User Guide

This document does not contain any export-controlled information.

Installation

427-0200-00-12 - Revision 110 - May 2021

2 Installation

This camera can be installed outdoors or indoors.

For outdoor installation, FLIR recommends:

Always using weatherproof equipment, such as boxes, receptacles, connectors, etc.

For electrical wiring, using the properly rated sheathed cables for conditions to which the cable will be

exposed (for example, moisture, heat, UV, physical requirements, etc.).

Planning ahead to determine where to install infrastructure weatherproof equipment. Whenever

possible, ground components to an outdoor ground.

Using best security practices to design and maintain secured camera access, communications

infrastructure, tamper-proof outdoor boxes, etc.

All electrical work must be performed in accordance with local regulatory requirements.

2.1 Supplied Components

The Saros DM-Series camera kit includes these items:

2.2 Site Preparation

There are several requirements that should be properly addressed prior to installation at the site.

The following specifications are requirements for proper installation and operation of the unit:

Ambient Environment Conditions: Avoid positioning the unit near heaters or heating system outputs.

Avoid exposure to direct sunlight. Use proper maintenance to ensure that the unit is free from dust, dirt,

smoke, particles, chemicals, smoke, water or water condensation, and exposure to EMI.

Accessibility: The location used should allow easy access to unit connections and cables.