User Guide

This document does not contain any export-controlled information.
Configuration
41
427-0200-00-12 - Revision 110 - May 2021
4.7.2 802.1x
Enable or disable IEEE 802.1x-compliant TLS communication.
Provide an Identity and Private Key Password.
Changing these settings does not immediately take effect. To apply a change to these settings, click
Save and then reboot the camera.
4.7.3 TLS/HTTPS
Enable or disable camera control using Transport Layer Security (TLS)/secure HTTP (HTTPS).
Enable or disable HTTPS redirect.
Changes to these settings do not immediately take effect. To apply the changes, click Save and then
reboot the camera.
4.7.4 Services
Enable or disable digest authentication for the FLIR CGI control interface. The default setting is On
(enabled).