User Guide

This document does not contain any export-controlled information.
Configuration
43
427-0200-00-12 - Revision 110 - May 2021
o Thermal Sharpness Toggle—Toggles through thermal video sharpness settings.
o P&T Start Tour—Initiates a tour of the pan and tilt preset positions (see PTZ Page).
o P&T Stop Tour—Stops the tour of the pan and tilt preset positions.
4.9 Firmware & Info Page
On the Firmware & Info page, you can:
· Upgrade the camera's firmware
· Specify a unique name for the camera
· Reset the camera to its factory defaults
· Reboot the camera
· Define a log level and download system
information
· Enable the compatibility mode for legacy VMS
versions
To upgrade the camera's firmware:
1. Make sure the camera has been recently rebooted.
2. Under Upgrade version, click Find file.
3. On your computer or network, browse to and select the firmware file.
Caution
Only upgrade to firmware developed for the Saros PTZ DM-Series camera.
4. Click Upgrade.
The camera uploads and installs the firmware, which takes a minute or two. After installing firmware, the
camera requires a reboot. When prompted, confirm rebooting the camera.