User Guide

This document does not contain any export-controlled information.

Camera Overview

427-0200-00-12 - Revision 110 - May 2021

1 Camera Overview

The Saros PTZ DM-Series cameras include a thermal sensor; a 4K visible light camera; audio; and digital

I/O. When the camera is connected to an IP network, it functions as a server, providing services such as

camera control, video streaming, and network communications. The server uses an open, standards-

based communication protocol to communicate with FLIR and third-party video management system

(VMS) clients, including systems that are compatible with ONVIF®. These clients can be used to control

the camera and stream video during day-to-day operations. For a list of supported VMS clients, refer to

the product's web page on FLIR.com.

The video from the camera is viewed by streaming it over an IP network using MJPEG and H.264

encoding.

The Saros PTZ DM-Series cameras are components within the FLIR Thermal Fence, which combines

FLIR thermal security cameras and control and management software in a fully integrated perimeter

security solution. The FLIR Thermal Fence provides automated perimeter surveillance, intrusion

detection, and alert capabilities for perimeter security applications. The FLIR Thermal Fence gives you

instant, automated threat detection and visual threat assessment capability around the clock in one easy-

to-use package.

If help is needed during the installation process, contact the local FLIR service representative or call the

support number that appears on the product's page at https://support.flir.com/. All installers and

integrators are encouraged to take advantage of the training offered by FLIR; visit

https://www.flir.com/support-center/training/ for more information.

For safety, and to achieve the highest levels of performance from the camera system, always follow the

warnings and cautions in this manual when handling and operating the camera.

Warning

Before drilling into surfaces for camera mounting, verify that electrical or other utility service lines are

not present. Serious injury or death may result from failure to heed this warning.

Caution

Except as described in this manual, do not open the camera for any reason. Damage to the camera

can occur as the result of careless handling or electrostatic discharge (ESD). Always handle the

camera with care to avoid damage to electrostatic-sensitive components.

Prior to making any connections, ensure the power supply or circuit breaker is switched off.

Be careful not to leave fingerprints on the camera’s infrared optics.

Operating the camera outside of the specified input voltage range or the specified operating

temperature range can cause permanent damage.