User Guide

This document does not contain any export-controlled information.
Installation
11
427-0200-00-12 - Revision 110 - May 2021
Step 1
Place the sponge inside the
bracket and route the cables
through the center of it, as
shown. You might need to cut a
slit in the sponge.
Step 2
Route the cables through the
bracket.
Step 3
Follow camera instructions to
assemble the pendant cap.
Use the Allen key and a hex
head cap screw to assemble and
firmly affix the camera's pendant
cap to the bracket.
Step 4
Affix the power box to the wall or
to the column.
Step 5
Attach the bracket to the power
box.
Step 6
Buckle up the safety rope, make
the camera connections, tighten
the two hex screws to seal the
box, and then complete
assembly.