User Guide

This document does not contain any export-controlled information.
Installation
19
427-0200-00-12 - Revision 110 - May 2021
To configure the camera for networking using the camera’s web page:
1. Open the camera’s web page either by double-clicking the camera in the DNA Discover List or by
typing the camera’s IP address in a web browser’s address bar. The camera's web page supports the
latest versions of popular web browsers.
2. On the login screen, type admin for the user
name and the password for the admin user
(default: admin).
When logging in to the camera for the first time or for the first time after performing a factory default,
specify a new password for the admin user. Use a strong password consisting of at least 12
characters and at least one uppercase letter, one lowercase letter, and one number. Passwords can
include the following special characters: |@#~!$&<>+_-.,*?= .
Log back in with the new password.
The camera's View Settings Home Page
opens.
3. Click System Settings, and make sure
the Network page appears.
4. You can click Static IP addressing and manually specify the camera's IP address, Netmask, and
Gateway. You can also specify the DNS Mode, Name Servers, MTU (maximum transmission unit),
and Ethernet Speed.