User Guide

This document does not contain any export-controlled information.
Camera Overview
5
427-0300-00-12 - Revision 110 - May 2021
Streaming Resolution
Thermal: 640x512 @ 30fps max
Visible: Up to 1080p on each stream at 30 FPS each.
One 4K stream at 30 FPS, or one 4K stream at 15
FPS and second stream in 1080p at 30 FPS.
Thermal Image
Settings
Auto AGC, Digital Detail Enhancement (DDE),
Brightness, Sharpness, Contrast
Thermal AGC Region
of Interest (ROI)
Default, presets and user-definable to ensure optimal
image quality on subjects of interest
Image Uniformity
Optimization
Automatic Flat-Field Correction (FFC) - Thermal and
Temporal Triggers, and manual FFC
System
Integration
Ethernet
10/100/1000 Mbps
Network APIs
FLIR SDK; FLIR CGI; ONVIF Profile S
Digital I/O
Input: Four sets / 5V 10kΩ pull up
Output: Two sets / relay output, 130mA max at 24
VDC / 24 VAC
Audio I/O
Bi-directional via terminal block connection
Illumination
Up to 200m NIR illumination
Distance: Up to 200m (656ft.) | 6° / 30 / 90°
Peak emission wavelength: 850 nm
Lens Window Wiper
Wiper is standard and camera is compatible with a
wash kit accessory
Network
Supported Protocols
IPV4, HTTP, UPnP, DNS, NTP, RTSP, RTP, TCP,
UDP, ICMP, IGMP, DHCP, ARP
Pan / Tilt
Performance
Pan Angle / Speed
Continuous 360° - 0.1° to 90°/sec
Tilt Angle / Speed
-10° to 190° - 0.1° to 60°/sec
Programmable
Presets
256
Preset Accuracy
0.25°
Sequence & Pattern
8 each
Mechanical Flip
Enable / disable
General
Input Voltage
24 VAC (±10%)
Universal Power over Ethernet (PoE) 60W 4 pair
forced mode, no support for CDP/LLDP
Weight
9.12 kg (20.1lb)
Dimensions
Diameter: 275mm (10.8in)
Height: 368mm (14.5in)
Input/Output
Input: Four sets / 5V 10kΩ pull up
Output: Two sets / relay output, 130mA max at 24
VDC / 24 VAC
Power Consumption
24 VAC max: 61W
PoE max: 43W
Environmental
IP Rating (Dust &
Water Ingress)
IP66
Operating
Temperature Range
-40°C to 60°C
Storage Temperature
Range
-55°C to 85°C