User Guide

This document does not contain any export-controlled information.
Camera Overview
2
427-0300-00-12 - Revision 110 - May 2021
Caution
Except as described in this manual, do not open the camera for any reason. Damage to the camera
can occur as the result of careless handling or electrostatic discharge (ESD). Always handle the
camera with care to avoid damage to electrostatic-sensitive components.
Prior to making any connections, ensure the power supply or circuit breaker is switched off.
Be careful not to leave fingerprints on the camera’s infrared optics.
Operating the camera outside of the specified input voltage range or the specified operating
temperature range can cause permanent damage.
Related Documentation
· Elara DX-Series Quick Install Guide
· FLIR CGI Interface Description 2.1
· Nexus CGI WebSockets Manual
· FLIR Sensors SDK Programmer’s Guide
1.1 Accessing Product Information from the FLIR Website
Up-to-date resources for the camera, including the FLIR Discovery Network Assistant (DNA) software
tool and this installation and user guide, are available from the camera’s product information and support
pages on FLIR.com. Select Products > Security > Thermal Security Cameras, and then click the relevant
product.
To access product information from the FLIR website:
1. Open https://www.flir.com/browse/security/thermal-security-cameras/.
Thermal Security Cameras Page on FLIR.com
2. Find and click the camera. The camera’s product information page appears.