Instructions

USER GUIDE 5
SPOT METERS AND REGIONS OF INTEREST (ROI)
When using spot meters and regions of interest, the FLIR ONE Pro will
display a temperature average (in degrees C or F) on the image. The
accuracy of the Spot Meter(s) depends on many factors, including the
distance from the object, the ambient temperature, and the emissivity of
the material being observed. Users are encouraged to learn more about
the science of Thermography from www.infraredtraining.com. To
switch between Fahrenheit to Celsius, use the Settings option in the
Control Panel.
Note: To add spot meters and/or RIOs, tap on the Spot Meter icon in the top
left corner to get a list of spot meters and RIOs. Up to three spot meters, three
square ROIs, and three circular ROIs can be displayed at one time. Tap and
hold the Spot Meter to move it around the screen. Pinch to adjust the size of
the RIOIs.
TORCH
FLIR MSX is a patented technology which makes use of the visible
camera in the FLIR ONE Pro to maximize detail and image sharpness.
This feature requires some amount of visible light, so in dark
environments turn on the smartphone’s ashlight to enhance the
image detail. This feature makes use of the light that is built into the
phone.
TIMER
The Timer option allows the user to set a time delay before an image
is saved. When the Timer icon is selected, the Timer control panel is
displayed. The user can set the time delay to 3 or 10 seconds or turn
o the time delay option. When the Timer delay is enabled, the user
saves an image by tapping the round white button at the bottom of the
screen, and then a timer displays the countdown.
SPOT METERS AND ROIs