Product Manual

Operation
7
7.8.2 Procedure
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Measurement
. This displays a toolbar.
3. On the toolbar, select Hot spot
.
7.9 Measuring the coldest temperature within
an area
7.9.1 General
You can measure the coldest temperature within an area. This displays a moving spot-
meter that indicates the coldest temperature.
7.9.2 Procedure
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Measurement
. This displays a toolbar.
3. On the toolbar, select Cold spot
.
7.10 Hiding measurement tools
7.10.1 Procedure
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Measurement
. This displays a toolbar.
3. On the toolbar, select No measurements
.
7.11 Changing the color palette
7.11.1 General
You can change the color palette that the camera uses to display different temperatures.
A different palette can make it easier to analyze an image.
7.11.2 Procedure
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Color
. This displays a toolbar.
3. On the toolbar, select a new color palette.
7.12 Working with color alarms
7.12.1 General
By using color alarms (isotherms), anomalies can easily be discovered in an infrared im-
age. The isotherm command applies a contrasting color to all pixels with a temperature
above or below the specified temperature level.
#T559828; r. AO/56381/56381; en-US
15