Quick Start Guide

ManualsBrandsFlir ManualsBullet Cameras1.3Mp Outdoor HD-CVI IR Bullet Camera

Package Contents

MODEL: C233BC/

C233BCP

QUICK START GUIDE

English Version 2.0

www.ﬂirsecurity.com/pro

As our products are subject to continuous improvement, FLIR

Systems Inc. reserves the right to modify product design,

speciﬁcations and prices, without notice and without incurring

any obligation. E&OE

Safety Precautions

• Use an appropriate low voltage power cable to

prevent ﬁre or electrical shock.

• Make sure to install the camera in an area that can

support the camera weight.

• There are no user serviceable parts inside the

camera. Please do not disassemble the camera.

• Do not clean the lens cover with an abrasive cleaning

material. Please use a soft cloth to clean the lens

cover.

1.3MP Fixed WDR Bullet Camera

www.ﬂirsecurity.com/pro

VISIT

• 1x 1.3MP Fixed WDR Bullet Camera

• 3x Mounting Screws

• 3x Drywall Anchors

• 1x Allen Key

• 1x Power Pigtail Adapter

• 1x Mounting Template

NOTE: 12V DC adapter not included.

On-Screen Display (OSD) Menu

IT’S ALL ON THE WEB!

Language

Video Format

Backlight

OFF

WDR

BLC

HLC

DNR

Advanced Lens ELC

ALC

Exposure

Brightness

Shutter

Sens-Up

AGC

White Balance

Auto

ATW

Preset

Manual

Day&Night

Mode

Delay

D N Level

N D Level

Smart IR

Smart IR Level

Image

Sharpness

Color Gain

Freeze

Flip

D-Zoom

Defog

Special Black Level

Privacy

DP Comp

Reset

Version

Exit

To use the OSD menu:

• OPTIONAL: Connect a test monitor to the

camera’s analog (yellow) BNC connector.

• Push the middle of the joystick to open the

OSD menu.

• Move the joystick / to select a setting,

then / to change the setting value.

• Push the middle of the joystick to conﬁrm selection.

• Arrows beside settings indicate a submenu ( ).

Select the setting and push the joystick to enter.

• Select RETURN and push the joystick to return to the

previous menu, or EXIT from the main menu to exit.

Conﬁgure OSD menu options using the

integrated control stick on the camera

cable (see image to the right).

See the full OSD menu tree below. For detailed

explanation of camera settings, see the OSD

instruction manual on www.ﬂirsecurity.com/pro.

Summary of content (2 pages)

PAGE 1
On-Screen Display (OSD) Menu Configure OSD menu options using the integrated control stick on the camera cable (see image to the right). To use the OSD menu: • OPTIONAL: Connect a test monitor to the camera’s analog (yellow) BNC connector. • Push the middle of the joystick to open the OSD menu. • Move the joystick / to select a setting, then / to change the setting value. • Push the middle of the joystick to confirm selection. • Arrows beside settings indicate a submenu ( ).
PAGE 2
Installing the Camera ATTENTION: Test the camera prior to selecting a permanent mounting location by temporarily connecting the camera(s) and cables to the DVR. To install the camera: 1. Use the included mounting template to mark and drill holes for the included mounting screws. NOTE: Insert the included drywall anchors if installing into drywall. 2. Connect the video and power cable as detailed in the section ‘Setting up the Camera’. 3.