Quick Installation Guide

Table Of Contents

Quick Install Guide

Ariel Gen II

CB-3102

Bullet IP Camera

A. What's in the Box

Qty

Description

CB-3102 mini-bullet camera

Bag containing three screws and three plastic anchors

T6 Torx wrench

Drill template

CB-3102 Quick Installation Guide

B. Accessing Camera Documentation and Utility Software from the Web

C. Insert and Configure the MicroSD Card

1. Unscrew the panel cover on the underside of the camera body.

2. Insert a microSDXC card (up to 128GB, Class 10) in the card drive.

3. Screw the panel cover closed.

PAGE 1
Ariel Gen II Quick Install Guide CB-3102 Bullet IP Camera A. What's in the Box Qty 1 1 1 1 1 Description CB-3102 mini-bullet camera Bag containing three screws and three plastic anchors T6 Torx wrench Drill template CB-3102 Quick Installation Guide B. Accessing Camera Documentation and Utility Software from the Web C. Insert and Configure the MicroSD Card 1. Unscrew the panel cover on the underside of the camera body. 2. Insert a microSDXC card (up to 128GB, Class 10) in the card drive. 3.
PAGE 2
D. Install the camera E. Connect the camera 1. Be sure to have the required accessories and tools available. 2. Refer to the User Guide as necessary. 3. Using the provided template, mark the drill locations 4. Mount the camera. 5. Check that camera orientation covers the required field of view. 1. Insert a cable in the RJ45 connector to attach to the network switch for a 10/100 Mbps Ethernet and POE connection. Note: This camera must be connected to a PoE source. 2.