User Guide

May 9, 201810
Basic Setup
DVT-KBD-G2 FLIR UVMS CCTV Keyboard
5 Basic Setup
5.1 Start Up
1. Connect the included power adapter to the keyboard and to a power outlet or surge
protector.
2. When the keyboard starts up it will show the current date and time on the display. Press ID
to enter the sign in screen.
3. Move the joystick down to highlight PW. Enter the admin password (default:000000). Press
ENTER to log into the keyboard.
4. Request to enter ID will be shown. Default ID '0' will be shows. Press ENTER to complete
login.
5.2 Connecting to a client machine using RS232
You can use the User guide to control the UVMS United Control Center via an RS232 serial
connection.
Note
To find the RS232 connection information in the UVMS, Finding RS232 Conneciton Information
in UVMS United Control Center
1. Connect the RS232 cable from the keyboard to the back of the client PC.
2. Plug in the keyboard to power it on.
3. Press ID to open the menu. Select the admin user and enter the password (default: 000000)
under PW.
4. Request to enter ID will be shown. Default ID '0' will be shows. Press ENTER to complete
login.
The keyboard will connect to the device
5.3 Finding RS232 Information on UVMS
When connecting to the UVMS United Control Center, the address settings are pre-defined in
the keyboard and does not require such configuration in the Control Center setting.
The following steps are required to allow the Control Center to recognize the keyboard: