Product Manual
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Notice to user
- 4 Customer help
- 5 Quick Start Guide
- 6 Description
- 7 Operation
- 7.1 Charging the battery
- 7.2 Turning on and turning off the camera
- 7.3 Saving an image
- 7.4 Recalling an image
- 7.5 Deleting an image
- 7.6 Deleting all images
- 7.7 Measuring a temperature using a spotmeter
- 7.8 Measuring the hottest temperature within an area
- 7.9 Measuring the coldest temperature within an area
- 7.10 Hiding measurement tools
- 7.11 Changing the color palette
- 7.12 Changing image mode
- 7.13 Changing the temperature scale mode
- 7.14 Setting the emissivity as a surface property
- 7.15 Setting the emissivity as a custom material
- 7.16 Changing the emissivity as a custom value
- 7.17 Changing the reflected apparent temperature
- 7.18 Changing the settings
- 7.19 Updating the camera
- 8 Technical data
- 9 Declaration of conformity
- 10 Cleaning the camera
- 11 Application examples
- 12 About FLIR Systems
- 13 Glossary
- 14 Thermographic measurement techniques
- 15 History of infrared technology
- 16 Theory of thermography
- 17 The measurement formula
- 18 Emissivity tables
Operation
7
• Digital camera: The camera displays a digital camera image.
7.12.2 Procedure
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Image mode
. This displays a toolbar.
3. On the toolbar, select one of the following:
• MSX
.
• Thermal
.
• Picture-in-picture (large)
.
• Picture-in-picture (small)
.
• Digital camera
.
7.13 Changing the temperature scale mode
7.13.1 General
The camera can operate in two different temperature scale modes:
• Auto mode: In this mode, the camera is continuously auto-adjusted for the best image
brightness and contrast.
• Lock mode: In this mode, the camera locks the temperature span and the temperature
level.
7.13.2 When to use Lock mode
A typical situation where you would want to use Lock mode is when looking for tempera-
ture anomalies in two items with a similar design or construction.
For example, if you are looking at two cables, where you suspect one is overheated,
working in Lock mode will clearly show that one is overheated. The higher temperature in
that cable would create a lighter color for the higher temperature.
If you use Auto mode instead, the color for the two items will appear the same.
7.13.3 Procedure
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
#T559828; r. AC/ 9610/10386; en-US
15