Installation Guide

STEP ONE
STEP THREE
SUGGESTED INSTALLATION
ATTACH CAMERA TO MOUNT
ATTACH MOUNT TO WINDSCREEN
CONNECT CAR CHARGER
© 2014, FLIR Systems, Inc.
FXAD01_QSG_EN_FR_R1
FLIR.COM/FX
FIND HELP AT FLIR.COM/FX
i
QUICK START GUIDE
GET TO KNOW YOUR
STEP TWO
PLACE SUCTION CUP ON WINDSCREEN AND
PRESS DOWN ON LEVER TO LOCK SUCTION CUP
LIFT LEVER TO UNLOCK SUCTION CUP
SLIDE CAMERA ONTO MOUNT ALL THE WAY
CONNECT USB CABLE TO CAMERA
CONNECT USB CABLE TO CAR CHARGER AND CONNECT CAR
CHARGER TO CIGARETTE LIGHTER
DASH MOUNT RECORDING
1
2
3
4
5
8
9
11
12
10
13
4
6
7
1
2
3
4
5
8
9
11
12
10
13
4
6
7
1
2
3
4
5
8
9
11
12
10
13
4
6
7
1
2
3
4
5
8
9
11
12
10
13
4
6
7
1. Suction Cup
2. Lock: Screw counterclockwise to
unlock ball and socket adjustment or
clockwise to lock.
3. Ball and Socket
4. Accessory Connector: Attach camera
all the way to enable car recording
mode.
5. Microphone: Records audio.
6. Speaker: Not used in car recording
mode.
7. Record Button: Flashes red to
indicate normal car recording in
progress. Flashes orange and red to
indicate emergency recording.
Press Record Button to activate
emergency recording.
8. microUSB: Camera will automatically
turn on when it detects USB
power while on dash mount. It is
recommended to keep the camera
plugged in at all times during car
recording mode.
9. MicroSD: 8GB to 64GB microSD card
with at least 3GB free required for
car recording mode. Class 10 card
required.
10. Suction Cup Lever: Pull up to unlock
suction cup and push down to lock
suction cup.
11. Power Button: Press to power on,
hold to power off.
12. Wi-Fi Button: Wi-Fi is disabled by
default when camera is attached to dash
mount. Press and hold for 5 seconds to
turn Wi-Fi on or off.
NOTE: Car recording is disabled when
Wi-Fi is turned on.
13. Direct Mode/Cloud Mode LED: Direct
Mode and Cloud Mode are disabled
when the camera is attached to the
dash mount.
NOTE: Car recordings are not saved to
FLIR Cloud.
8GB to 64GB microSD (class 10) card must be inserted in the camera to use car recording.
Camera will beep if no microSD card is installed or if microSD has less than 3GB free.
1. Normal Car Recording:
Camera will turn on automatically when it is on dash mount and USB power is detected
(for example, when you start your car).
Camera will record at all times when it is on the dash mount and turned on. The Record Button
will flash red during normal car recording.
The camera will reserve up to 40% of the total space on the microSD card for normal car
recording. When this space is full, the camera will continue recording by overwriting the oldest
videos first.
The camera will stop recording if the camera is removed from the dash mount, runs out of
batteries, or is manually powered off by pressing and holding the power button.
2. Emergency Recording:
Emergency recording is activated if the accelerometer detects a strong G force (such as from
hard braking or an accident). The Record button will flash red and orange during Emergency
Recording.
You can manually activate emergency recording by pressing the Record Button.
Emergency recording will pre-record 10 seconds before the event occurs and then record
40 seconds after.
Emergency Recording files will remain on the microSD card until you manually delete them.
3. Viewing Recordings:
To view the recordings on a PC or Mac, connect the microSD card to the computer or connect
the camera to the computer with the USB cable and no stand attached.
Car recordings are saved to the CAR folder on the microSD card, and Emergency recordings
are saved to the EVENT folder.
FXAD01_QSG_EN_FR.indd 1-2 12/12/2014 1:44:04 PM

Summary of content (2 pages)