User manual

ManualsBrandsFLIR ManualsElectricalFX 1080p Indoor Wi-Fi IP Camera

INSTALL CAMERA TO WALL OR CEILING

QUICK START GUIDE

1. LOOSEN ADJUSTMENT RING TO ADJUST THE

HORIZONTAL POSITION

2. LOOSEN WITH THE INCLUDED ALLEN KEY TO

ADJUST THE VERTICAL POSITION

3. LOOSEN WITH THE INCLUDED ALLEN KEY TO

TWIST THE CAMERA ON THE STAND

MAKE SURE TO FULLY TIGHTEN THE ADJUSTMENT

SCREWS AFTER SETTING THE POSITION

ADJUST THE CAMERA POSITION

NOTE: INSTALL THE CAMERA IN A LOCATION WITH A STRONG WI-FI SIGNAL AND

NEAR A PROTECTED POWER OUTLET

Cancel

Camera se tup

PLACE THE QR CODE INSIDE

THE TARGET

PLEASE MAKE SURE THE

CAMERA IS TURNED ON

lch003484156

Rating: 5V DC 2A

Model No: FXV101-H

IC:8575AFXV101

FCC ID: UCZFXV101

FLIR SYSTEMS, INC.

LINTHICUM, MD 21090, USA

MADE IN CHINA

Serial:123456789012

MAC ID:123456789012

lch003484156

Rating: 5V DC 2A

Model No: FXV101-H

IC:8575AFXV101

FCC ID: UCZFXV101

FLIR SYSTEMS, INC.

LINTHICUM, MD 21090, USA

MADE IN CHINA

Serial:123456789012

MAC ID:123456789012

CONNECT THE CAMERA TO THE

INCLUDED POWER ADAPTER AND

CONNECT THE POWER ADAPTER TO A

POWER OUTLET.

CAUTION: MAKE SURE THE POWER

CONNECTOR AND POWER OUTLETS

ARE PROTECTED FROM THE ELEMENTS

WHEN INSTALLING.

REMOVE THE PROTECTIVE

FILM FROM THE LENS COVER

AFTER YOU HAVE FINISHED THE

INSTALLATION.

RECONNECT POWER AND REMOVE LENS FILM

DOWNLOAD THE FLIR FX APP TO YOUR DEVICE, LAUNCH

THE APP, AND CREATE AN ACCOUNT

Email Address

Password

Conrm Password

A B

CHECK THE LED INDICATORS ON

THE BACK OF THE CAMERA BY

REMOVING THE CAMERA FROM

THE HOUSING. IF THE LED

IS GLOWING, SELECT STEADY

ORANGE ON THE APP SCREEN.

UNFASTEN LATCHES

THE CAMERA ARM MUST BE

STRAIGHTENED BEFORE THE

CAMERA CAN BE REMOVED

FROM THE HOUSING

OPEN CAMERA

COMPARTMENT

SLIDE CAMERA OUT

COMPLETE THE CAMERA SETUP

ON YOUR MOBILE DEVICE, OPEN THE SETTINGS MENU AND CONNECT TO THE WI-FI

NETWORK CREATED BY THE CAMERA.

RETURN TO THE FLIR FX APP. THE APP WILL CONNECT TO THE CAMERA’S WI-FI NETWORK.

GIVE YOUR CAMERA A NAME AND PASSWORD AND PRESS SET.

SELECT YOUR HOME NETWORK FROM THE LIST.

ONCE CONNECTED, THE LED WILL GLOW GREEN AND A “CAMERA ADDED” MESSAGE

WILL BE DISPLAYED.

SCAN THE CAMERA’S QR CODE

TO REMOVE THE CAMERA FROM THE HOUSING:

FIRMLY GRASP THE

SUNSHADE AND

SLIDE IT BACK

(BACK OF CAMERA)

EXAMINE THE LED

INDICATORS

NOTE: FOR MORE HELP CONNECTING YOUR CAMERA, VISIT FLIR.COM/FX AND CLICK SUPPORT.

Summary of content (4 pages)

PAGE 1
Q U I C K S TA R T G U I D E DOWNLOAD THE FLIR FX APP TO YOUR DEVICE, LAUNCH T H E A P P, A N D C R E AT E A N A C C O U N T 1 A B Login Email Address Password Confirm Password LOGIN D C 2 S C A N T H E C A M E R A’ S Q R C O D E C H E C K T H E L E D I N D I C AT O R S O N THE BACK OF THE CAMERA BY REMOVING THE CAMERA FROM THE HOUSING. IF THE LED IS GLOWING, SELECT STEADY ORANGE ON THE APP SCREEN.
PAGE 2
G U I D E D E D É M A R R AG E R A P I D E KU R Z A N L E I T U N G G U I DA R A P I DA GUÍA DE INICIO RÁPIDO M A N UA L D E I N Í C I O 1 Français Deutsche TÉLÉCHARGER L’APPLICATION FLIR FX SUR VOTRE APPAREIL, LANCER L’APPLICATION ET CRÉER UN COMPTE. LADEN SIE DIE FLIR FX APP AUF IHR GERÄT HERUNTER, STARTEN SIE DIE APP, UND LEGEN SIE EIN KONTO AN. A. Entrer votre adresse électronique et votre mot de passe, puis appuyer sur Connexion. A.
PAGE 3
GET TO KNOW YOUR FLIR FX 1. Latch: Lock or unlock camera inside mount. Both latches must be firmly locked to ensure weatherproof rating of the mount. 2. Camera: You can remove the camera to use on its own or with one of the other accessories. See FLIR.COM/FX for instructions. 3. Accessory Connector: Slide the camera all the way right to remove it from the mount or all the way left to connect it. 4. Outdoor Night Vision LEDs: See further in the dark. 1 2 3 4 8 5 6 9 10 7 5.
PAGE 4
and ur APPRENEZ À CONNAÎTRE VOTRE FLIR FX LERNEN SIE IHRE FLIR FX KENNEN VENITE A CONOSCERE LA VOSTRA FLIR FX FA M I L I A R Í C E S E C O N S U F L I R F X CONHECER A SUA FLIR FX Français 1. Loquet : Verrouiller ou déverrouiller le support intérieur de la caméra. Les deux loquets doivent être fermement verrouillés afin d’assurer l’étanchéité du support. 2. Caméra : Vous pouvez retirer la caméra pour l’utiliser telle quelle ou avec l’un des accessoires. Consulter FLIR.COM/FX pour les instructions. 3.