Product Manual

ManualsBrandsFLIR ManualsAccessories for Environmental Monitoring2" Pins for MR06, MR07 and MR08

2 inch pins for MR06, MR07, MR08, includes 10

pair of pins

General description

Part number

MR-PINS2-10

Part name 2 inch pins for MR06, MR07, MR08, includes 10

pair of pins

FLIR’s new insulated pins are smaller in diameter—requiring minimal force to drive the pins into a

surface-resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-

piece design prevent bending and create an improved bonding surface for the abrasion-resistant

insulation. The insulation extends all the way to the connection to the probe, so even if you drive the

pins all the way into the wall cavity, the drywall will not affect the measurement.

• Fits FLIR’s hammer, wall cavity and combo probes.

• Unibody construction rather than two piece.

• Smaller-diameter pins.

• Sandblasted hardened steel.

• Insulated with abrasion-resistant coating.

Replacement pin set for FLIR MR06, MR07, and MR08.

Meter data

Suitable accessory

MR06, MR07, MR08

Included insulated pin pairs and length 10 pairs of 2 in. (50 mm)

Warranty 1 Year (with Registration)

Meter physical data

Weight 0.12 kg (0.25 lb.)

Dimensions (H × W × L) 8 mm × 8 mm × 76 mm (0.32 in. × 0.32 in. × 3 in.)

Material Stainless steel

Color

Black insulation

Shipping information

Packaging type Plastic bag

Packaging contents 10 pairs of 2 in. insulated pins

Packaging weight 0.127 kg (0.3 lb.)

Packaging dimensions (H × W × L) 1 cm × 9 cm × 8 cm (0.4 in. × 3.6 in. × 3.2 in.)

Inner carton weight 6 kg (11 lb.)

Inner carton dimensions (H × W × L) 13 cm × 19 cm × 38 cm (5.2 in. × 7.5 in. × 15 in.)

Inner carton quantity (bag)

Master carton weight 12 kg (26.5 lb.)

P/N: MR-PINS2-10

appearing herein are either registered trademarks

or trademarks of FLIR Systems and/or its

subsidiaries. All other trademarks, trade names or

company names referenced herein are used for

identification only and are the property of their

respective owners.

Document identity

Publ. No.: MR-PINS2-10

Release:

Commit: 30138

Language: en-US

Modified: 2015-10-31

Formatted: 2015-11-02

Website

http://www.flir.com

Customer support

http://support.flir.com

Disclaimer

Specifications subject to change without further

notice. Camera models and accessories subject

to regional market considerations. License

procedures may apply. Products described herein

may be subject to US Export Regulations. Please

refer to exportquestions@flir.com with any

questions.

1 (3)

www.flir.com

Summary of content (3 pages)

PAGE 1
2 inch pins for MR06, MR07, MR08, includes 10 pair of pins P/N: MR-PINS2-10 Copyright © 2015, FLIR Systems, Inc. All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Document identity Publ. No.
PAGE 2
inch pins for MR06, MR07, MR08, includes 10 pair of pins P/N: MR-PINS2-10 Shipping information © 2015, FLIR Systems, Inc. Master carton dimensions (H × W × L) 15 cm × 40 cm × 40 cm (6 in. × 15.8 in. × 15.8 in.) Master carton quantity 100 EAN-13 0793950372128 UPC-12 793950372128 Country of origin China Tariff code 9025900000 #MR-PINS2-10; r. /30138; en-US Technical support 2 (3) Website http://support.flir.com E-mail TMsupport@flir.com Phone 855-499-3662 Repairs repair@flir.
PAGE 3
© 2015, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.