Datasheet

ManualsBrandsFLIR ManualsAccessories for Environmental Monitoring4" Pins for MR06, MR07 and MR08

4 inch pins for MR06, MR07, MR08, includes 1

pair of pins

General description

Part number

MR-PINS4

Part name 4 inch pins for MR06, MR07, MR08, includes 1

pair of pins

FLIR’s new insulated pins are smaller in diameter—requiring minimal force to drive the pins into a

surface-resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-

piece design prevent bending and create an improved bonding surface for the abrasion-resistant

insulation. The insulation extends all the way to the connection to the probe, so even if you drive the

pins all the way into the wall cavity, the drywall will not affect the measurement.

• Fits FLIR’s hammer, wall cavity and combo probes.

• Unibody construction rather than two piece.

• Smaller-diameter pins.

• Sandblasted hardened steel.

• Insulated with abrasion-resistant coating.

Replacement pin set for FLIR MR06, MR07, and MR08.

Meter data

Suitable accessory MR06, MR07, MR08

Included insulated pin pairs and length 1 pair of 4 in. (101 mm)

Warranty 1 year (with registration)

Meter physical data

Weight 0.02 kg (0.05 lb.)

Dimensions (H × W × L) 8 mm × 8 mm × 127 mm (0.32 in. × 0.32 in. × 5

in.)

Material Stainless steel

Color Black insulation

Shipping information

Packaging type Plastic bag

Packaging contents 1 pair of 4 in. insulated pins

Packaging weight 0.172 kg (0.4 lb.)

Packaging dimensions (H × W × L) 1 cm × 2.5 cm × 13 cm (0.4 in. × 1 in. × 5.2 in.)

Inner carton weight 2 kg (4.4 lb.)

Inner carton dimensions (H × W × L) 13 cm × 19 cm × 38 cm (5.2 in. × 7.5 in. × 15 in.)

Inner carton quantity (bag)

100

Master carton weight 8 kg (17.7 lb.)

Master carton dimensions (H × W × L) 28 cm × 40 cm × 40 cm (11 in. × 15.8 in. × 15.8

in.)

Master carton quantity 400

P/N: MR-PINS4

appearing herein are either registered trademarks

or trademarks of FLIR Systems and/or its

subsidiaries. All other trademarks, trade names or

company names referenced herein are used for

identification only and are the property of their

respective owners.

Document identity

Publ. No.: MR-PINS4

Release:

Commit: 30160

Language: en-US

Modified: 2015-11-02

Formatted: 2015-11-02

Website

http://www.flir.com

Customer support

http://support.flir.com

Disclaimer

Specifications subject to change without further

notice. Camera models and accessories subject

to regional market considerations. License

procedures may apply. Products described herein

may be subject to US Export Regulations. Please

refer to exportquestions@flir.com with any

questions.

1 (3)

www.flir.com

Summary of content (3 pages)

PAGE 1
4 inch pins for MR06, MR07, MR08, includes 1 pair of pins P/N: MR-PINS4 Copyright © 2015, FLIR Systems, Inc. All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Document identity Publ. No.
PAGE 2
4 inch pins for MR06, MR07, MR08, includes 1 pair of pins P/N: MR-PINS4 Shipping information © 2015, FLIR Systems, Inc. EAN-13 0793950372043 UPC-12 93950372043 Country of origin China Tariff code 9025900000 #MR-PINS4; r. /30160; en-US Technical support 2 (3) Website http://support.flir.com E-mail TMsupport@flir.com Phone 855-499-3662 Repairs repair@flir.com www.flir.
PAGE 3
© 2015, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.