Product Manual

ManualsBrandsFlir ManualsAccessoriesLens with Carrying Case for Exx Series Advanced Thermal Camera

Notice to customer

Changing and calibrating lenses

Table of contents

1 Thank you! ............................................................................................... 1

2 Applicability .............................................................................................. 1

3 Changing lenses (FLIR Exx series) ................................................................2

4 Changing lenses (FLIR T5xx series)............................................................... 5

5 Calibrating the lens–camera combination ........................................................ 8

6 Customer support ...................................................................................... 9

7 Appendix ............................................................................................... 10

1 Thank you!

Thank you for choosing a product from FLIR Systems. We hope that the product will

meet your expectations and that you will consider us again for your future needs.

2 Applicability

Note Part numbers subject to change and/or amendment without further notice.

Please check http://support.flir.com for latest applicability data.

2.1 Lens applicability

Sales order P/N Item P/N Product denomination

T199588 T199106 Lens 14° + case

T199590 T199104 Lens 42° + case

T199589 T199105 Lens 24° + case

2.2 Camera applicability

P/N Product denomination

78502-0101 FLIR E75 24°

78504-0101 FLIR E75 24° + 14°

78506-0101 FLIR E75 24° + 14° & 42°

78505-0101 FLIR E75 24° + 42°

78503-0101 FLIR E75 42°

78507-0101 FLIR E75 42° + 14°

78502-0201 FLIR E85 24°

78504-0201 FLIR E85 24° + 14°

78506-0201 FLIR E85 24° + 14° & 42°

78505-0201 FLIR E85 24° + 42°

78503-0201 FLIR E85 42°

78507-0201 FLIR E85 42° + 14°

78502-0301 FLIR E95 24°

78504-0301 FLIR E95 24° + 14°

78506-0301 FLIR E95 24° + 14° & 42°

78505-0301 FLIR E95 24° + 42°

78503-0301 FLIR E95 42°

78507-0301 FLIR E95 42° + 14°

79302-0101 FLIR T530 24°

79304-0101 FLIR T530 24° + 14°

79306-0101 FLIR T530 24° + 14° & 42°

79305-0101 FLIR T530 24° + 42°

79303-0101 FLIR T530 42°

appearing herein are either registered trademarks

or trademarks of FLIR Systems and/or its

subsidiaries. All other trademarks, trade names or

company names referenced herein are used for

identification only and are the property of their

respective owners.

Document identity

Publ. No.: T810264

Release: AC

Commit: 45029

Head: 45029

Language: en-US

Modified: 2017-09-18

Formatted: 2017-09-18

Website

http://www.flir.com

Customer support

http://support.flir.com

Disclaimer

Specifications subject to change without further

notice. Models and accessories subject to

regional market considerations. License

procedures may apply. Products described herein

may be subject to US Export Regulations. Please

refer to exportquestions@flir.com with any

questions.

1 (10)

www.flir.com

Summary of content (10 pages)

PAGE 1
Notice to customer Changing and calibrating lenses Copyright Table of contents © 2017, FLIR Systems, Inc. All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Document identity Publ. No.
PAGE 2
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. P/N Product denomination #T810264; r.
PAGE 3
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. #T810264; r. AC/45029/45029; en-US 3. The infrared detector is now fully exposed. Do not touch this surface. If you see dust on the detector, follow the instructions in 7.2 Infrared detector, page 10. 4. Make sure that the inner ring of the camera lens is fully in its open position. • Correct: The tooth (1) is in its end position at the black stop pin (2).
PAGE 4
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. 5. Carefully push the lens into position. #T810264; r. AC/45029/45029; en-US 6. Rotate the inner ring of the lens 30° clockwise. The lens makes a click when it locks in place. 7. Make sure that the two index marks are aligned, indicating that the lens is locked in place. 4 (10) www.flir.
PAGE 5
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. 4 Changing lenses (FLIR T5xx series) #T810264; r. AC/45029/45029; en-US Note If the new lens has not been used with the camera before, the lens–camera combination must be calibrated after the lens has been mounted. See section 5 Calibrating the lens–camera combination, page 8 for information on how to do this. Note Do not touch the lens surface when you change lenses.
PAGE 6
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. #T810264; r. AC/45029/45029; en-US 3. The infrared detector is now fully exposed. Do not touch this surface. If you see dust on the detector, follow the instructions in 7.2 Infrared detector, page 10. 4. Make sure that the inner ring of the camera lens is fully in its open position. • Correct: The tooth (1) is in its end position at the black stop pin (2).
PAGE 7
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. 5. Carefully push the lens into position. #T810264; r. AC/45029/45029; en-US 6. Rotate the inner ring of the lens 30° clockwise. The lens makes a click when it locks in place. 7. Make sure that the two index marks are aligned, indicating that the lens is locked in place. 7 (10) www.flir.
PAGE 8
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. 5 Calibrating the lens–camera combination #T810264; r. AC/45029/45029; en-US 5.1 Introduction Before a new lens can be used with the camera, the lens–camera combination must be calibrated. This is a process that previously had to be performed by a FLIR service department, but for the FLIR Exx series and FLIR T5xx series the calibration can be performed by the user, using a calibration target.
PAGE 9
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. #T810264; r. AC/45029/45029; en-US 3. Mount the new lens on the camera according to the procedure in section 3 Changing lenses (FLIR Exx series), page 2 or section 4 Changing lenses (FLIR T5xx series), page 5. When the lens is mounted, the calibration wizard starts automatically. 4. From a distance of 2 m (6.6 ft.), aim the camera toward the crosshair, using the laser pointer. The camera will take a picture automatically.
PAGE 10
Notice to customer Changing and calibrating lenses © 2017, FLIR Systems, Inc. 7 Appendix #T810264; r. AC/45029/45029; en-US 7.1 Infrared lens 7.1.1 Liquids Use one of these liquids: • A commercial lens cleaning liquid with more than 30% isopropyl alcohol. • 96% ethyl alcohol (C2H5OH). 7.1.2 Equipment Cotton wool CAUTION If you use a lens cleaning cloth it must be dry. Do not use a lens cleaning cloth with the liquids that are given in section 7.1.1 above.