Product Manual

Notice to customer

Changing and calibrating lenses

#T810264; r. AC/45029/45029; en-US

3. The infrared detector is now fully exposed. Do not touch this surface. If you see dust

on the detector, follow the instructions in 7.2 Infrared detector, page 10.

4. Make sure that the inner ring of the camera lens is fully in its open position.

• Correct: The tooth (1) is in its end position at the black stop pin (2).

• Wrong: You must rotate the inner ring until the tooth (1) reaches the black stop pin

(2).

6 (10)