Datasheet

5 Operation
4. Press the
or button to scroll through the options in an open menu
item.
5. Press the
or button to increase/decrease the selected value.
6. Press the
button to exit without saving.
7. After a change, do one of the following:
• Press the
button to save the changed value.
• Press the
button to exit without saving.
Note After 10 seconds of inactivity, the setup menu will exit without saving
any changes.
8. Press the
button to move up one step in the menu hierarchy and to exit
the setup menu.
5.3 Factory Default Profiles menu
The FLIR VS70 has two factory default profiles (Default1 and Default2) and one
user profile for brightness, contrast, hue, and saturation camera settings. To ac-
cess the Factory Default menu, follow this procedure:
1. Navigate to the the VIDEO FORMAT screen in the setup menu as explained
in Section 5.2.
2. Press OK to open the TV OUTPUT NTSC/PAL selection screen
3. Press either of the camera buttons (top left or top right button) to access the
Factory Setup screen; The user profile settings will be shown, these can be
adjusted and saved by the user. Scroll down to Default1 or Default2 and
press OK to use one of the factory default profiles.
5.4 Installing probe accessories
Three accessories (mirror, anti-snag tip, and magnet) are supplied with each
probe.
#T559827; r. AE/36943/36943; en-US 14