FloLogic CONNECT Quick Start User Guide ® CONNECTION WiFi VALVE MODE Home STATUS Away Touch for Bypass Hold for Water Shutoff Smarter Water Control™ flologic.
FloLogic CONNECT QQuick Start User Guide This guide reviews the basics of operating your FloLogic System through the FloLogic app. It also provides initial CONNECT Module and app setup instructions. Visit the Support section of www.flologic.com to find any updates, helpful how-to videos and to get answers to specific questions about operation and setup.
TABLE OF CONTENTS FloLogic CONNECT Setup Creating an Account............................................................................................... 1 Configuring the CONNECT Module. . ................................................................... 3 CONNECT Module Operation ...............................................................................9 FloLogic App Basic Operation System Mode.......................................................................................................
CREATING AN ACCOUNT FloLogic CONNECT Setup CREATING AN ACCOUNT 1. Download the FloLogic app from the Apple or Google app stores. 2. From the home screen, touch the “Create Account” button in the lower left corner. 3. Enter the email to associate with your account, the name to associate with you as a user, and a password (Minimum 8 characters with upper case and lower case letters, number(s) and one or more special characters). 4.
CREATING AN ACCOUNT 2
CONFIGURING THE CONNECT MODULE CONFIGURING THE CONNECT MODULE 1. Ensure that the Module mounting location is in an area with a strong 2.4 Ghz WiFi signal. For an existing FloLogic setup, remove the Communication Cable from the back of the FloLogic Control Panel; on a new setup, use the Communication Cable from the FloLogic Valve. 2. Plug the black Communication Cable into the bottom of the Connect Module in the right-side port, as you’re looking at the front of the Connect Module. 3.
CONFIGURING THE CONNECT MODULE Removable Cable Cutout Factory Reset Button Communication Cable from Valve Local Connection Cable 4
CONFIGURING THE CONNECT MODULE Once the account has been setup, the email verified and the cables connected, log into the app. Stand within 8 feet of the CONNECT Module. Next, tap the “Add Device” icon or tap the “+” symbol from the dashboard screen to add an additional device. Please note, the FloLogic CONNECT Module requires a strong 2.4GHz router signal. Network security experts recommend that IoT devices get provisioned to a guest Wi-Fi network to segregate them from other devices on the network.
CONFIGURING THE CONNECT MODULE Enter the last six digits of the serial number found printed on the bottom edge of the CONNECT WiFi Module. If prompted, allow your device to join the "FloLogic" network. Select your preferred WiFi network from the provided list then enter the password for the network (passwords are case sensitive). The CONNECT Module will now complete its connection. This will take several minutes.
CONFIGURING THE CONNECT MODULE After five minutes, if you don’t get a green CONNECTION light, you may have entered an incorrect password. Press the WiFi button on the top right of the Module and wait for the CONNECTION light to blink red, close the app, reopen then restart the process. If the device fails to connect through the primary method, you may be prompted to connect through a "Legacy" method.
CONFIGURING THE CONNECT MODULE After you get connected, personalize your System by naming it and adding an installation address. The Global Name field is the name that everyone connected to your valve will see while the Friendly Name allows you to name it something meaningful to just yourself. IMPORTANT: Adding your insurance information and address could help you qualify for lower premium rates ongoing. Once connected you can also access your FloLogic device(s) from a browser by logging in at myflologic.
CONNECT MODULE OPERATION CONNECT MODULE NOTIFICATIONS AND OPERATION The CONNECT Module offers basic operation functions through its button interface. See the below diagram to learn the functionality of each button and about what the differing lights indicate. Touch to change router credentials. Hold five seconds to restart provisioning process from the ® beginning. CONNECTION WiFi VALVE MODE Home STATUS Away Touch for Bypass Hold for Water Shutoff Smarter Water Control™ flologic.
APP OPERATION FloLogic App Basic Operation: Please note that FloLogic Systems with the CONNECT Module must continue to have the local Control Panel powered up and operating. The Control Panel enables local operation independent of an internet connection. When a CONNECT Module is installed, the Control Panel will automatically remain in sync with operation from the app, and vice versa. HOW IT WORKS FloLogic works by monitoring every water flow event that occurs at or above the flow sensitivity setting.
APP OPERATION *MODES ARE AS FOLLOWS: HOME MODE: Allows flow times that you can set so FloLogic won’t interfere with showers and normal use, but will still flag and stop leaks. All flow time allowances are adjustable. AWAY MODE: Allows shorter flow times for ice makers, etc. to operate, while flagging leaks quickly. Flow time allowances are adjustable, or the System can shut off the water automatically in Away mode (when the Away time is set to zero).
APP OPERATION SETTINGS To view and adjust System settings, touch the gear icon in the upper right corner of the Valve Status screen. Adjustments to various parameters can be made within each setting screen.
APP OPERATION SYSTEM INFO: Lets you view or change Global or Friendly names for a System, enter or edit the property address, add insurance policy information, update software, manage the WiFi network connection, allows System disabling and allows you to disown a System from your app/account. FLOW SENSITIVITY: Also called the “Drip Rate,” on the Control Panel, sets the flow level that must be reached in order for the System to begin monitoring flow. Flow rates below this setting are ignored.
APP OPERATION NOTIFICATIONS: Configures the System alerts and mode changes for which you will receive notifications on your smartphone or tablet. Notification history is also available here. Pre-Alert Notices give advance shutoff alerts, while No Flow Detected alerts are sent when no water flow is detected for the interval of time selected. This may be useful to monitor the use of water as a wellness check.
APP OPERATION SHARE A DEVICE From the Dashboard View, touch the Sharing icon at the top. Touch Get Started and select the System you wish to share, then the user permissions you wish to grant. Next, enter the email address of the individual. An email will be sent to the individual providing instructions. If the new user already has the app and an account that matches the email address you entered, they will see the invitation to access your device.
TROUBLESHOOTING TROUBLESHOOTING: Device Failed to Provision : This is likely due to an incorrect password or WiFi misalignment. You will need to re-provision. Press the WiFi button on the side of the CONNECT Module once. When CONNECTION slowly flashes red, you can restart the provisioning process on page 5. A weak WiFi signal may cause a device to fail to connect. A WiFi extender or signal booster may be required in this case.
FCC Statements FCC Class B Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at least 20 cm from all persons.
IC Statements ISED RSP-100 Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Remember to visit the Support section of www.flologic.com for a host of resources and answers about your System. You can also email us at support@flologic.com or call 877-FLOLOGIC (356-5644) Be sure to register your FloLogic System on the “Product Registration” page at www.flologic.com. Access your FloLogic device from any browser by logging in at myflologic.com ©2021, FloLogic, Inc.
