Use and Care Manual

ManualsBrandsFlorida Pneumatic ManualsKitchen3/8 in. Reversible Drill

FLORIDA-PNEUMATIC.COM

Please contact 1-800-356-3392 for further assistance.

FP-985

Reversible 3/8-in. Drill

DRILLS

General Safety Information & Replacement Parts

WARNING: Risk of injury to persons. Read and

understand operation instructions. Always become familiar

with all the instructions and warnings before operating any

pneumatic tool.

General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Air Compressor and Air Tool Safety . . . . . . . . . . . . . . . . . . . 2-3

Tool Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance / Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

TABLE OF CONTENTS

Summary of content (8 pages)

PAGE 1
FP-985 Reversible 3/8-in. Drill DRILLS General Safety Information & Replacement Parts TABLE OF CONTENTS General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Air Compressor and Air Tool Safety . . . . . . . . . . . . . . . . . . . 2-3 Tool Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maintenance / Lubrication . . . . . . . . . . . . . . . . .
PAGE 2
Safety Information 7.2.2.
PAGE 3
Safety Information (continued) AIR COMPRESSOR AND AIR TOOL SAFETY 1. Risk of Bursting. Do not adjust the regulator to result in output pressure greater than the marked maximum pressure of this air tool. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm.
PAGE 4
Installation 1 Cleaning the air hose Ƒ A 3/8" air hose is required, with a maximum length of 25 ft. Ƒ Clean the air hose of accumulated dust and moisture before connecting it to the air supply. NOTE: If a longer air hose is required, connect a 1/2" air hose to the 3/8" air hose to ensure the drill has the necessary air supply.
PAGE 5
Operation 1 Operating the drill Ƒ This Drill is designed to operate on 90 PSIG. Lower pressure (below 90 PSIG) will reduce performance of the tool. Higher air pressure (over 90 PSIG) raises the performance of the tool beyond its rated capacity and could cause serious damage to tool and user. 3 Installing and removing the bits WARNING: Disconnect tool from air supply before servicing or changing accessories.
PAGE 6
Troubleshooting Problem Possible Cause Solution The tool runs slowly or will not operate. There is grit or gum in the tool. Flush the tool with air tool oil or gum solvent. The tool is out of oil. Lubricate the tool according to the lubrication instructions in this manual. The air pressure is low. Ƒ Adjust the regulator on the tool to the maximum setting. Ƒ Adjust the compressor regulator to the tool’s maximum setting of 90 psi. The air hose leaks.
PAGE 7
Service Parts / Exploded View Drawing Ref Part Number Description # Qty Ref Part Number # Description Qty. FLORIDA-PNEUMATIC.COM Please contact 1-800-356-3392 for further assistance.
PAGE 8
Questions, problems, missing parts? Call Customer Service 8 a.m.-5 p.m., EST, Monday-Friday 1-800-356-3392 FLORIDA-PNEUMATIC.COM Retain this manual for future use.