Instructions / Assembly

Assembly Instructions for the following:

TearDrop, MoonDrop, UFO, Flying Saucer

Caution!

TAKE EXTREME CARE IN FINDING A STRONG, SAFE MOUNTING LOCATION

Parts List:

(1) Storage bag

(1) Hanging chair

(1) Screw locking carabiner

(1) Rope – 26 feet or 8 meters

(8) Steel tubes

Step 1: Place your hanging chair upside

down flat on the ground, there you will find

the belt loops where you will insert the

steel tubes

Step 2: Insert steel tubes one at a time

through the built-in loops on the hanging

chair, assuring the straps lay on top the

tubes.

Step 3: Feed all steel tubes individually into

each other one at a time until the ring is

complete

Step 4: Mount your hanging chair from a

safe, strong location and enjoy

Instructions current as of January 2018

PAGE 1
Assembly Instructions for the following: TearDrop, MoonDrop, UFO, Flying Saucer Caution! TAKE EXTREME CARE IN FINDING A STRONG, SAFE MOUNTING LOCATION Parts List: (1) Storage bag (1) Hanging chair (1) Screw locking carabiner (1) Rope – 26 feet or 8 meters (8) Steel tubes Step 1: Place your hanging chair upside down flat on the ground, there you will find the belt loops where you will insert the steel tubes Step 2: Insert steel tubes one at a time through the built-in loops on the hanging chair, assuring
PAGE 2
SAFETY GUIDE IMPORTANT INFORMATION – Do not discard Caution! TAKE EXTREME CARE IN FINDING A STRONG, SAFE MOUNTING LOCATION Caution! Safety is most important! This is not a toy, it is made for rest, relaxation, reflection, and meditation. Take extreme care when setting up, mounting, and using your hanging chair. 1. Do not hang more than 24 inches off the ground. 2. Do not attempt to step or stand inside or on top the hanging chair 3. Do not ride or hang on the outside of the hanging chair. 4.